Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

wrong thing to do wit intake!

Thread Tools
 
Search this Thread
 
Old 08-25-2004 | 11:31 PM
  #1  
ws62001ta's Avatar
Thread Starter
On The Tree
 
Joined: Jul 2004
Posts: 156
Likes: 0
From: Houston TX
Default wrong thing to do wit intake!

ok, i didnt want to pay 100$ for lid so i cut resenators off, i 4got that a hose connects to the resantator,**** but my question to yall is, were does that hose connect to at the bottom of the car(i see some part but dont know what it is),**** 2nd question****do i have to have that hose connected to my air box?
Old 08-26-2004 | 12:19 AM
  #2  
cyphur's Avatar
TECH Senior Member
iTrader: (10)
 
Joined: Mar 2003
Posts: 8,009
Likes: 0
From: North Texas
Default

Well, I'll presume you're talking about the baffles. And that hose leads to your AIR system. It pumps air into your cats. If you keep your air system, you'll need to attach that hose with some zip tie or something and put a breather on it. Or, you can take out your AIR system. Note, its a emissions component, so if you need to pass emissions, this might make it more difficult. When I put on my ls6 intake I got rid of EGR and AIR and haven't looked back. Here is a tutorial explaining how to do both.

http://www.ls1camaro.net/sections.ph...ticle&artid=70




All times are GMT -5. The time now is 04:31 AM.