I know this ?? is old but, how much power with PS LT's and MagnaFlow CB
#1
TECH Resident
Thread Starter
I know this ?? is old but, how much power with PS LT's and MagnaFlow CB
I just ordered pacesetter LT's, ORY, and MagnaFlow Catback. i have 0 $$$ for a tune now. but how much power can i expect to get average over stock manifolds, cats, and a cutout on a A4 00 T/A?? thanks
#2
TECH Resident
iTrader: (2)
Join Date: Jan 2004
Location: Tulsa, OK
Posts: 788
Likes: 0
Received 0 Likes
on
0 Posts
I picked up 2mph with mine with a higher race weight. So figure 20-25rwhp STD but it varies per car. Mine feels WAY stronger in the mid range. I have a wheel hop problem now that I didn't have before. Mine is on the stock tune. FWIW
#4
TECH Resident
iTrader: (6)
Join Date: Oct 2004
Location: Long island, NY
Posts: 947
Likes: 0
Received 0 Likes
on
0 Posts
Well the cutout negates the gains of the ORP and magnaflow when open, so you are really only looking at an increase from the LT's which along with the cutout should give you anywhere from 15-25rwhp. And I'd say 25-40rwhp for full exhaust like that over your previous setup when the cutout was closed.
Make your next mod an LS6 intake and than get a cam. Local guy here just gained 15rwhp and 17 tq with the addition of an LS6 intake on his SS that already had LT's & ported TB same as yours will have. here it is:
http://www.fastls1.com/forums/showth...&threadid=5716
Make your next mod an LS6 intake and than get a cam. Local guy here just gained 15rwhp and 17 tq with the addition of an LS6 intake on his SS that already had LT's & ported TB same as yours will have. here it is:
http://www.fastls1.com/forums/showth...&threadid=5716
#5
TECH Resident
iTrader: (2)
Join Date: Jan 2004
Location: Tulsa, OK
Posts: 788
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by KB99WS6
Well the cutout negates the gains of the ORP and magnaflow when open, so you are really only looking at an increase from the LT's which along with the cutout should give you anywhere from 15-25rwhp. And I'd say 25-40rwhp for full exhaust like that over your previous setup when the cutout was closed.
Make your next mod an LS6 intake and than get a cam. Local guy here just gained 15rwhp and 17 tq with the addition of an LS6 intake on his SS that already had LT's & ported TB same as yours will have. here it is:
http://www.fastls1.com/forums/showth...&threadid=5716
Make your next mod an LS6 intake and than get a cam. Local guy here just gained 15rwhp and 17 tq with the addition of an LS6 intake on his SS that already had LT's & ported TB same as yours will have. here it is:
http://www.fastls1.com/forums/showth...&threadid=5716