help with mac install

Reply Subscribe

Thread Tools

Search this Thread

Jan 30, 2005 | 02:28 PM

8ASTANG

Thread Starter

Teching In

Joined: Oct 2004

Posts: 30

Likes: 0

From: VANDENBERG AFB, CA

help with mac install

I,m putting the pass side back together and noticed the stock manifold had two egr ports and my headers only have one what do i do?

Attached Thumbnails

Last edited by 8ASTANG; Jan 30, 2005 at 02:42 PM. Reason: forgot pics

Jan 30, 2005 | 03:26 PM

BTLFEDSS

TECH Fanatic

iTrader: (12)

Joined: Feb 2004

Posts: 1,600

Likes: 0

From: Mass

One is for your air tube and ones for your egr looks like you have no egr provision on your header the one in the picture is for you air tube
BTLFEDSS

Jan 30, 2005 | 03:45 PM

8ASTANG

Thread Starter

Teching In

Joined: Oct 2004

Posts: 30

Likes: 0

From: VANDENBERG AFB, CA

Anybody know what I should do?I bought these headers off of another member and was told they are for a 99 f body.My car is a 99.

Jan 30, 2005 | 03:51 PM

jrp

SN95 Director

iTrader: (16)

Joined: Jul 2003

Posts: 10,755

Likes: 7

From: Valencia, Ca

those are for an 01+ car. just !egr or get new headers.

Jan 30, 2005 | 04:11 PM

BTLFEDSS

TECH Fanatic

iTrader: (12)

Joined: Feb 2004

Posts: 1,600

Likes: 0

From: Mass

You can plug the hole in your in take with a rubber plug which i have done can't remember the size off the top of my head but i'm sure if you do a search you can find it in doing this you eliminate the egr and will get an SES light if you can live with that or will have to get a tune or sell those and buy a new set
BTLFEDSS

Jan 30, 2005 | 06:19 PM

SmokingWS6

TECH Fanatic

iTrader: (1)

Joined: Jun 2004

Posts: 1,795

Likes: 2

From: St. Louis MO

Rubber plug won't do it. Block off plates are very common, you could try a search for them. Basically cut out a sheet of metal the shape of the port, cutout some generic autozone gasket and bolt it shut.