02 Sim install

Reply Subscribe

Thread Tools

Search this Thread

Feb 7, 2005 | 02:02 PM

Steves01Z28

Thread Starter

Teching In

Joined: Oct 2004

Posts: 4

Likes: 0

From: MO

02 Sim install

Sorry to bother with this, but I can't find where to install one of the 02 sims. I got one connected under the brace in the middle-center of the car closer to the right side. Where does the other one go? Is there a site that shows where they attach?

Thanks!

Feb 7, 2005 | 02:14 PM

GT Griller

12 Second Club

iTrader: (8)

Joined: Oct 2004

Posts: 1,689

Likes: 0

From: Hereford,Lubbock

Just folow the 02 sensor that u are replacing.

Feb 7, 2005 | 02:22 PM

code4

9 Second Club

iTrader: (30)

Joined: Apr 2004

Posts: 1,419

Likes: 0

Quote:

Originally Posted by Steves01Z28

My driver side plug was on top of the K member.

Feb 7, 2005 | 03:16 PM

Steves01Z28

Thread Starter

Teching In

Joined: Oct 2004

Posts: 4

Likes: 0

From: MO

I would but they were removed when I got a new cat-back system. So from the 02 under the K-member on the right side, where is the other 02 connector?

Feb 7, 2005 | 03:42 PM

code4

9 Second Club

iTrader: (30)

Joined: Apr 2004

Posts: 1,419

Likes: 0

Quote:

Originally Posted by Steves01Z28

I would but they were removed when I got a new cat-back system. So from the 02 under the K-member on the right side, where is the other 02 connector?

I'm starting to doubt myself here. My car is on the ground & covered right now. I am almost positive that there is a plug on each side of the tranny (m6) for the rear 02's. They are attached to the tranny, I just filled the plugs with silicone, it's been a while ago. If you don't get an answer I'll put her back on the lift later tonight. I am debating driving her anyway since we are getting some sun right now.

Here is a pic, I believe the blue connector you can see closer to the bell housing is to the driver rear 02. The other connector is the CAGS delete.

Name: 000_0977.jpg
Views: 42
Size: 160.5 KB