SLP Y-PIPE (low)
#1
Teching In
Thread Starter
Join Date: Dec 2003
Location: Shillington Pennsylvania
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
SLP Y-PIPE (low)
Does anyone have a SLP y-pipe on there F-Body and does it scrape. I have longtubes and then high flow cats then my y-pipe. On the left side of the car, the tube comes off the cat and bends down a little bit giving me only about 2.5 inches of clearance...Did anyone do any mods to prevent this problem??? Thanks Jason
#3
TECH Enthusiast
Join Date: Apr 2003
Location: silver Spring MD
Posts: 561
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 00' WS6 T/A
Does anyone have a SLP y-pipe on there F-Body and does it scrape. I have longtubes and then high flow cats then my y-pipe. On the left side of the car, the tube comes off the cat and bends down a little bit giving me only about 2.5 inches of clearance...Did anyone do any mods to prevent this problem??? Thanks Jason
I have the SLP LT headers, Cats, and Y pipe. I had to put jacks under the system to keep it high while I tighten the bolts otherwise it would hang down low. I had to use two floor jack (did in my garage).
I hope this helps
Bill
#6
Hell yeah, especially with flowtech cutouts......and an extra 400# stereo equip.
Honestly, even before my mods, I had scraping issues
(w/SLP level 1 Bilstein suspension) see pg (1) for exhaust pics, pg (4) for ground clearance
Honestly, even before my mods, I had scraping issues
(w/SLP level 1 Bilstein suspension) see pg (1) for exhaust pics, pg (4) for ground clearance
#7
Originally Posted by 00' WS6 T/A
Hey thanks alot for your info...I guess slp just needs to develope there y-pipe a little better. Jason
AMEN, I support SLP avidly, and the performance is fantastic, but the Design ????