how do I remove it

 

you cant drill and tap it?

 

Easyout or reverse cut drill bit. Should come out fairly easy unless you torqued the ever lovin crap out of it.

 

Do it just like porcuppines make love.... verrry carefully. J/K Easyouts are a lifesaver. Is there any piece left sticking out of the head or did it break off inside the hole?

 

there is no peice sticking out, what are easy outs and where do I get them?

 

do I have to drill a hole through the entire broken peice to get the easy out to work cuz I only have a hole drilled in less than half way or so.

 

You don't have to drill all the way through it. I usually just go 1/4" or so.

 

hey thanks alot for the tip man, I tried easy outs and that didnt work. but the reverse cut bit did. it was funny I thought I wasnt gonna be able to get the thing out, so I just bought some ls6 heads to cure the problem they should be here on friday. they are just stock ls6 heads, but considering I still have an ls1 intake and stock heads I think its gonna make pretty good power with the mods I already have.


Adam