but how could you sell that car!!!!!!! 
QTP Lt's/Catted Y-pipe question
Thread Starter
On The Tree
Joined: Jun 2004
Posts: 101
Likes: 0
QTP Lt's/Catted Y-pipe question For all of you who have them I am wondering your ground clearance is?
If it was terrible what did you have to do to get it to fit? and what was your final ground clearance?
If it was terrible what did you have to do to get it to fit? and what was your final ground clearance?
!LS1 11 Second Club
Joined: Apr 2003
Posts: 7,133
Likes: 2
From: Miami
The Y-pipe has several joints. You need to play around with it until it tucks up as high as you can get it. This means, having to adjust it a few times until its right if you don't get it right the first time. It's worth the initial PITA factor, as no other Y-pipe flows better.
Launching!
Joined: Apr 2005
Posts: 263
Likes: 0
From: Abilene, TX
I would stay away from it if you have an incline or speed bumps anywhere near where you live......i had mine tweaked several times and it still scraped even taking stuff at angles, ultimately i had to have it cut up and customized with 2 RandomTech Cats to finally have some ground clearance, RandomTech #70300 $239.82 each is what i used, it will cost you more than the $525 catted y from QTP to buy your 4" Flowmaster merge collector, cats, and labor, but if you end up having to do what i did in order to get ground clearance anyway, it will save you the $525 from not buying the QTP and you won't pay for a y-pipe twice 
The QTP y-pipe does flow very well, but ultimately if you only need a little ground clearance, you should be fine because like the other guy said no other y-pipe flows better, but my customized "QTP" (only thing that is left is the merge collector) looks better and i haven't scraped a single thing, and i don't have to take **** at an angle now.....a lot more enjoyable to drive the car and not worry about it scraping 
Props to Steve @ The Muffer Shoppe in Abilene TX!!!! anyway here's some pics
Old One
http://community.webshots.com/photo/...08474097YztANC
http://community.webshots.com/photo/...08474314qIGrgR
http://community.webshots.com/photo/...08474630tmQSlb
New One
http://community.webshots.com/photo/...08476527SluKmD
http://community.webshots.com/photo/...08476533jXqkRX
http://community.webshots.com/photo/...08476630VobshI
The QTP y-pipe does flow very well, but ultimately if you only need a little ground clearance, you should be fine because like the other guy said no other y-pipe flows better, but my customized "QTP" (only thing that is left is the merge collector) looks better and i haven't scraped a single thing, and i don't have to take **** at an angle now.....a lot more enjoyable to drive the car and not worry about it scraping Props to Steve @ The Muffer Shoppe in Abilene TX!!!! anyway here's some pics Old One
http://community.webshots.com/photo/...08474097YztANC
http://community.webshots.com/photo/...08474314qIGrgR
http://community.webshots.com/photo/...08474630tmQSlb
New One
http://community.webshots.com/photo/...08476527SluKmD
http://community.webshots.com/photo/...08476533jXqkRX
http://community.webshots.com/photo/...08476630VobshI
Last edited by slpss9723; Jul 30, 2005 at 03:26 PM.
Trending Topics
!LS1 11 Second Club
Joined: Apr 2003
Posts: 7,133
Likes: 2
From: Miami
It hurt me tons to sell it, but as my daily driver, I was going to kill myself in it (I was streetracing way too much, and my newborn son needs me around). So, I sold it, got a rebadged WRX for my DD and a shitbox '88 Fox Vert (it's actually pretty nice) for a track car. I'm taking my addiction off the streets and on to the roadcourse.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
Launching!
Joined: Apr 2005
Posts: 263
Likes: 0
From: Abilene, TX
thanx a lot.....if you can afford it.....wait i couldn't afford it .......get it done, because i think my clearance is better than stock, if not it's pretty damn close: you just have to find a guy that's willing to take the time to get it right because it certainly can be done!!!
.......get it done, because i think my clearance is better than stock, if not it's pretty damn close: you just have to find a guy that's willing to take the time to get it right because it certainly can be done!!! 
Launching!
Joined: Apr 2005
Posts: 263
Likes: 0
From: Abilene, TX
Originally Posted by taintedmeat
Slpss, are you lowered? I'm curious because I haven't heard of many people scraping as bad as your pics show with a stock suspension.
Originally Posted by slpss9723
i have the SLP option Bilstein, so it is only lowered in the back, but i have some shitty streets and live at an apt. complex with inclines on both entrances, those carsound cats were just too damned big so i got rid of those *****!!!!
Launching!
Joined: Apr 2005
Posts: 263
Likes: 0
From: Abilene, TX
http://video.ls1tech.com/Player.aspx...043A51EBA6&p=0
hear for yourself it sounds a little different now believe it or not with the new custom work and cats i guess the 158 more cfm from the RandomTechs gave it a little deeper/louder rumble at idle and also at WOT.....i'll get another video when i make it out to my parents house in the country so i can get loud again 
hear for yourself
it sounds a little different now believe it or not with the new custom work and cats i guess the 158 more cfm from the RandomTechs gave it a little deeper/louder rumble at idle and also at WOT.....i'll get another video when i make it out to my parents house in the country so i can get loud again Launching!
Joined: Apr 2005
Posts: 263
Likes: 0
From: Abilene, TX
hey taintedmeat: did you read the whole thread?? I had serious clearance issues with QTP's catted Y even after having it adjusted several times.....not trying to hurt QTP's business but i would strongly recommend spending a little more and get the RandomTech cats & Flowmaster merge collector individually and have a custom y built i wish i would have done that first instead of spending $525 plus labor to install, then $493.44 after shipping for the cats, and then $240 labor on my damn y-pipe setups: you can get the merge collector for $49.99 from QTP if you want to stick with them, then labor for install which you're going to have to spend anyway 
$543.43=a lot less headache in my opinion!!!
$543.43=a lot less headache in my opinion!!!
Originally Posted by slpss9723
hey taintedmeat: did you read the whole thread?? I had serious clearance issues with QTP's catted Y even after having it adjusted several times.....not trying to hurt QTP's business but i would strongly recommend spending a little more and get the RandomTech cats & Flowmaster merge collector individually and have a custom y built i wish i would have done that first instead of spending $525 plus labor to install, then $493.44 after shipping for the cats, and then $240 labor on my damn y-pipe setups: you can get the merge collector for $49.99 from QTP if you want to stick with them, then labor for install which you're going to have to spend anyway $543.43=a lot less headache in my opinion!!!
$543.43=a lot less headache in my opinion!!! Launching!
Joined: Apr 2005
Posts: 263
Likes: 0
From: Abilene, TX
Originally Posted by taintedmeat
I'd probably be installing everything myself dog. I have access to everything I'd need except for a welder.