Anybody use these brand Headers??
Thread Starter
TECH Apprentice
iTrader: (9)
Joined: Nov 2003
Posts: 320
Likes: 0
From: S.W. Louisiana
Anybody use these brand Headers?? I found them on ebay, heres the link.http://cgi.ebay.com/ebaymotors/98-CA...QQcmdZViewItem
Anybody know anything about these headers, they look nice.
Anybody know anything about these headers, they look nice.
ssautochrome has a long history of faulty products in the past for import cars and alike. i frequent dakota forums and the 4.7L headers they make are junk. those "look" nice and are a great deal for SS headers but we all want products that last and dont fail. i would bet that the pipes and flanges are different grades and upon heating up they will stretch at different rates thus creating cracks. we wont know though until people start buying and putting some miles on them.
Originally Posted by spy2520
are they asking for a test mule? why the pics?
someone pointed out that it'd be strange for them to need a test mule OR pics if they designed the headers for the car.
someone pointed out that it'd be strange for them to need a test mule OR pics if they designed the headers for the car.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Staging Lane
Joined: Nov 2001
Posts: 77
Likes: 0
From: Phoenix Arizona
They look pretty good to me just from the pics. Nice long primaries and very long collectors. The EGR location is for a 98-99 car, but that shouldn’t be any real problem for a 2k wanting to keep the EGR connected. The Air fittings have a pretty big diameter hole so I would recommend restrictor plates to keep the check valves from fluttering. Access to the spark plugs and clearance around the steering shaft “looks” like it will be fine, but it’s kind of hard to tell from the pictures. I think I would give them a try if I didn’t already have headers on both of my cars.
