ls6 intake?
the only mod you need to make is your coolant crossover. you ahve to get the ls-6 style coolant lines that runs under the intake manifold. everything else will bolt right up w/ no problem.
Trending Topics
hey wait a minute. I thought there were 2 different ls6 manifolds. To be clear, we should tell the guy that the z06 one is slightly different from the f-body one in that it has no bracket for throttle cables or something like that because it is throttle-by-wire. right???
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
I have a ZO6 LS6 intake on my car and it had holes for the throttle bracket, the gaskets are not made on the intake, they are basically O rings on each port that you can remove, some people don't change them, but I think the gaskets are like $10 for the pack, I did it when I changed mine, won't hurt to change them or leave the old ones on...
Originally Posted by spy2520
hey wait a minute. I thought there were 2 different ls6 manifolds. To be clear, we should tell the guy that the z06 one is slightly different from the f-body one in that it has no bracket for throttle cables or something like that because it is throttle-by-wire. right???
Originally Posted by lrk322
What if I have a 99 camaro with Air and EGR. What LS6 instake should I look for?