Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

pacesetters & extentions?!

Thread Tools
 
Search this Thread
 
Old Oct 30, 2005 | 09:25 PM
  #21  
MakoLS1's Avatar
TECH Apprentice
 
Joined: Jul 2004
Posts: 375
Likes: 0
From: Carolina
Default

I bought one o2 for a vette and one for an Fbody. If you buy both for a vette one will be wayyyyyy to much wire. The only side that needs to be extended is the drivers side 02. The stock length on the other side fits fine.
Reply
Old Oct 31, 2005 | 03:30 AM
  #22  
prostock_bigblock's Avatar
Thread Starter
12 Second Club
iTrader: (11)
 
Joined: Jan 2005
Posts: 1,191
Likes: 0
From: NC, Charlotte / SC, RockHill
Default

Just installed the headers guys and used the 24 exten. and bolted on the rummbler-x tsp true duals and the car really sounds meen .Though , the mechanic was really suprised when he test drive the car he thought that I was running 4.10`s but he was shocked when I talled him that those r the stock 3.42.

Car really pulled hard guys and spinns on all 1 , 2 , 3 gears........

Track no. will be updated soon ...

Thanks for all the comments
Reply
Old Nov 4, 2005 | 12:50 AM
  #23  
MadMike329's Avatar
On The Tree
 
Joined: Sep 2005
Posts: 126
Likes: 0
From: Albuquerque, New Mexico
Default

Will sims hurt my engine in any way? i've heard some bad things about them and i didn't know if they were a good idea. Do they mess with the fuel to air ratio? as of now i just have the two rear sensors all taped up under the car... didn't know what else to do with them
Reply
Old Nov 5, 2005 | 08:03 AM
  #24  
Rothman's Avatar
TECH Apprentice
iTrader: (4)
 
Joined: Aug 2005
Posts: 399
Likes: 0
From: Hahira, GA
Default

I'd also like to know about the sims as well as part #'s for the corvette wires.
Reply
Old Nov 5, 2005 | 12:06 PM
  #25  
Zymosis's Avatar
TECH Fanatic
iTrader: (7)
 
Joined: Jan 2005
Posts: 1,309
Likes: 0
From: World
Default

Originally Posted by MadMike329
Will sims hurt my engine in any way? i've heard some bad things about them and i didn't know if they were a good idea. Do they mess with the fuel to air ratio? as of now i just have the two rear sensors all taped up under the car... didn't know what else to do with them
Sims will not hurt your engine at all for the rears. You can either get sims or get them tuned out so your SES doesnt light up. The rears in no way change your A/F ratio.
Reply
Old Nov 5, 2005 | 04:17 PM
  #26  
SLPSS01's Avatar
12 Second Club
iTrader: (6)
 
Joined: Jul 2004
Posts: 528
Likes: 0
From: Warrenville, IL.
Default

I got two 24" extensions from Speed Inc when I did mine, around $30 for the pair. Make sure you tie up any slack when you install, especially on the driver side where it will hang close to the headers. One of the sides needed less than 24" probably only 12" but I can't remember which. sorry.
As mentioned the vette o2's are $ and I wouldn't get them unless you NEED new o2's.
Get a set of new GM gaskets too, the ones that come with the headers are cheap. I've heard of guys re-using the stock ones but for $20 imo it's worth getting a new set.
Reply
Old Nov 7, 2005 | 09:57 AM
  #27  
MadMike329's Avatar
On The Tree
 
Joined: Sep 2005
Posts: 126
Likes: 0
From: Albuquerque, New Mexico
Default

Originally Posted by Zymosis
Sims will not hurt your engine at all for the rears. You can either get sims or get them tuned out so your SES doesnt light up. The rears in no way change your A/F ratio.

Alright, thanks man! i just wanted to make sure... what do the rear o2 sensors do anyway?
Reply




All times are GMT -5. The time now is 10:25 PM.

story-0
10 Reasons Daily Driving a Swap Project SUCKS! (& 1 Reason to Do It Anyway)

Slideshow: 10 reasons daily-driving a swap project might not be for you. Or is it?

By Michael S. Palmer | 2026-06-17 09:39:05


VIEW MORE
story-1
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'

Don't get dad new socks or a grill brush this year.

By Brett Foote | 2026-06-09 14:55:56


VIEW MORE
story-2
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?

Slideshow: We take a close look at the ONE and Artidiag 800BT2 diagnostic tools from Topdon and the reasons to buy one over the other.

By Pouria Savadkouei | 2026-06-18 10:26:23


VIEW MORE
story-3
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine

Slideshow: The controversial Ferrari F6 swaps its original flat-12 for a Corvette Z06-derived LT4 V8 and sends power to four rear wheels through a custom-built drivetrain.

By Verdad Gallardo | 2026-05-26 18:23:54


VIEW MORE
story-4
7 Most Reliable High-Performance Engines GM Has Ever Built

Slideshow:These GM engines didn't just make huge power, they survived abuse, boost, track days, and six-digit mileage with a reputation for refusing to quit.

By Verdad Gallardo | 2026-05-21 16:45:27


VIEW MORE
story-5
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Slideshow: This heavily modified 1971 Camaro mixes classic muscle car styling with a fifth-generation Camaro interior and modern LS3 power.

By Verdad Gallardo | 2026-05-12 18:06:42


VIEW MORE
story-6
6 Common C5 Corvette Failures and What's Involved In Repairing Them

Slideshow: From wobbling harmonic balancers to failed EBCMs, these are the issues that define long-term C5 ownership and what repairs typically involve.

By Pouria Savadkouei | 2026-05-07 18:44:57


VIEW MORE
story-7
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Slideshow: A modern Camaro transformed into a retro icon, this limited-run "Bandit" build blends nostalgia with brute force in a way few revivals manage.

By Verdad Gallardo | 2026-04-21 13:57:02


VIEW MORE
story-8
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Slideshow: Cadillac didn't just crash the high-performance luxury vehicle party, it showed up loud, supercharged, and occasionally a little unhinged...

By Pouria Savadkouei | 2026-04-16 10:05:15


VIEW MORE
story-9
Top 10 Most Powerful Chevy Trucks Ever Made!

Slideshow: Top ten most powerful Chevy trucks ever made

By | 2026-03-25 09:22:26


VIEW MORE