why ory
its the y-pipe that comes off of the headers. the stock one is flat on both sides and very restrictive in air flow. ory= off road y-pipe. if you have long tube headers your stock ory won't work as its too long for the headers. won't match up.
I Guess I Have One That Is Custom Made Because I Bought The Car About A Year Ago And It Had The Headers On Already And There Is No Flanges It Welds Right From The Headers To 3 Inch Piping And Goes Through The Cut Out And Out To The Back Of The Car.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Originally Posted by black01_WS6
its the y-pipe that comes off of the headers. the stock one is flat on both sides and very restrictive in air flow. ory= off road y-pipe. if you have long tube headers your stock ory won't work as its too long for the headers. won't match up.
Just to set the rumor straight: The stock y-piping does NOT pose a significant restriction, regardless of the pancake shape! The cats pose a minimal restriction on a stock car, and more so on a modded one. The pancake pipe is ugly, but NOT restrictive. This is tested and proven.
Originally Posted by Redneck Z
Just to set the rumor straight: The stock y-piping does NOT pose a significant restriction, regardless of the pancake shape! The cats pose a minimal restriction on a stock car, and more so on a modded one. The pancake pipe is ugly, but NOT restrictive. This is tested and proven.
Do a search for before and after dyno's of the SLP replacement pipe. This pipe replaces the pancake section of pipe, and is a very nice piece. Most have dyno'd 0-2rwhp, and some have even shown (-)numbers. Do a search and check it out. This makes sense also, because there is nothing restrictive about that piece of pipe. The pancake shape is not a big deal, and the diameter is still as large as a round piece of pipe.