Under Drive Pulley Questions

Reply Subscribe

Thread Tools

Search this Thread

Nov 5, 2005 | 03:26 PM

The PAT WS6

Thread Starter

Banned

iTrader: (14)

Joined: Apr 2005

Posts: 1,701

Likes: 0

From: Keller

Under Drive Pulley Questions

was looking into underdrive pulleys and had some questions, about them in general which one is gonna be the best?
what all is needed when doing this?
and since its going to be smaller will you need smaller belts or anything?
is there a write up or something else that gives details on puttin it in

thanks

Nov 5, 2005 | 04:36 PM

black01_WS6

TECH Junkie

iTrader: (13)

Joined: Sep 2004

Posts: 3,857

Likes: 0

From: Fort Myers, FL.

tsp sells everything you need to put it on belts and pulley, and at a reasonable price. the powerbond and the slp are the same in my mind. buy one that you can get the best price for. if you buy things seperatly get the gatorback belt as its the best.

Nov 5, 2005 | 08:33 PM

Xtnct00WS6

TECH Fanatic

iTrader: (8)

Joined: Jan 2005

Posts: 1,429

Likes: 2

From: Sterling VA

Call up any of our sponsors and they'll set ya straight. I called Thunder Racing and got the ASP under drive pulley.

Nov 5, 2005 | 09:11 PM

BLCKBRD

TECH Apprentice

iTrader: (6)

Joined: Jan 2004

Posts: 338

Likes: 0

From: Kitchener, ON, Canada

I got the ASP pulley without the alternator pulley.
You also need a new crank pulley bolt.

Nov 6, 2005 | 08:07 PM

The PAT WS6

Thread Starter

Banned

iTrader: (14)

Joined: Apr 2005

Posts: 1,701

Likes: 0

From: Keller

oh hard are they to do? is there any kind of write up?
thanks guys

Nov 7, 2005 | 06:40 PM

01formulafromthebay

Staging Lane

iTrader: (2)

Joined: Sep 2005

Posts: 95

Likes: 0

From: NOR CAL Bay Area

i installed my underdrive pulley this weekend at my buddies shop we put my car on the lift got the biggest breaker bar and went to town on the bolt got that off and then used a three jaw puller to get the pully off. to get the new pully on we used a arp crank bolt that is longer than the sock bolt to get it on then put the stock one back on an torqued the crap out of it and took it off and put the arp bolt back in with a crap load of red lock tight all over it and torqued the crap out of that and called it a day.
here is a site that has a more detailed install http://www.ls1camaro.net/sections.ph...ticle&artid=24

Last edited by 01formulafromthebay; Nov 7, 2005 at 06:46 PM.

Nov 7, 2005 | 07:05 PM

USMARINE1108

TECH Regular

iTrader: (2)

Joined: Apr 2005

Posts: 490

Likes: 22

From: Beaufort SC

Does anyone have any feedback on the Powerbond? I' searching and reading reviews, but just wondering if anyone has anything new to say about them. Thanks.

Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Verdad Gallardo

6 Common C5 Corvette Failures and What's Involved In Repairing Them

Pouria Savadkouei

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Verdad Gallardo

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Pouria Savadkouei

Top 10 Most Powerful Chevy Trucks Ever Made!

Hennessey's New Supercharged Silverado ZR2 Has 700 HP

Verdad Gallardo

Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

Verdad Gallardo

Awesome K5 Blazer Restomod Comes With C7 Corvette Power

Verdad Gallardo

10 Camaros You Should Never Buy

10 LS Engine Myths That Refuse to Die

Verdad Gallardo

Nov 8, 2005 | 05:23 PM

z-ya

TECH Fanatic

iTrader: (1)

Joined: Jan 2003

Posts: 1,104

Likes: 0

From: minneapolis,mn

Ati pulleys are very nice but spendy.March pulleys are fluid damped and should protect
the bottom end better,but they are heavier. I went with the march.

Nov 8, 2005 | 05:24 PM

#10

z-ya

TECH Fanatic

iTrader: (1)

Joined: Jan 2003

Posts: 1,104

Likes: 0

From: minneapolis,mn

Ati pulleys are very nice but spendy.March pulleys are fluid damped and should protect
the bottom end better,but they are heavier. I went with the march.