Delphi MAF
SLP = Delphi + resistor + sticker.
This is a topic that will give you too many search
results, to read in one sitting.
Short answer is, leave it stock (at least until you
have run out of more effective things to buy).
This is a topic that will give you too many search
results, to read in one sitting.
Short answer is, leave it stock (at least until you
have run out of more effective things to buy).
Do not waste your money. Search the forums and you will find the majority (including those with drastically modified setups) prefer the stock MAF to any aftermarket one. I have personally tried (during the newbie phase) an SLP compared to a stock MAF and I was surprised that I did lose some HP compared to my stock unit.
Suggestion: Clean your stock unit with some basic rubbing alchol and do not port, descreen, or otherwise mod it. Save your money for a ported TB, you will not reget that purchase.
Suggestion: Clean your stock unit with some basic rubbing alchol and do not port, descreen, or otherwise mod it. Save your money for a ported TB, you will not reget that purchase.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Originally Posted by Humming Bird
SLP=
do a speed density tune and get rid of your maf
do a speed density tune and get rid of your maf