Cutout Switch Wiring Problem Help
Thread Starter
TECH Fanatic
iTrader: (33)
Joined: Mar 2005
Posts: 1,434
Likes: 0
From: South Jersey/Moorestown
Cutout Switch Wiring Problem Help Please I need some help here
I got the switch, I got the wires all ran underneath the cutout hooked up and now I need the wires to the switch. I've no idea on how to run them to the actual switch itself. There were 8 wires connected to it and just need to know how to run the wires. I'm so lost
PLEASE HELP THANK YOU
They are in the shape of a square and it's the QTP switch I believe
I got the switch, I got the wires all ran underneath the cutout hooked up and now I need the wires to the switch. I've no idea on how to run them to the actual switch itself. There were 8 wires connected to it and just need to know how to run the wires. I'm so lost
PLEASE HELP THANK YOU
They are in the shape of a square and it's the QTP switch I believe
its doesnt have some sort of sticker or instructions on how the switch will work, in terms of which is the ground and postive plug?? if so all you need is to ground the switch and run the positive side to the accessorie part under the hood its a bolt with a nut on it with a red cap by the fuse box, and then it should work.
I have the "stock" QTP switch and I REALLY need some help. I have no clue how to wire this damn thing and the cut out remains open. I NEED to at least get it shut so I can drive the car. ANY help would be GREATLY appreciated
