Changing Cutoff Switch To Conv. Switch
Changing Cutoff Switch To Conv. Switch Can Anyone Give Me The Link That Shows The Wiring Diagram To Change The Qtp Elct. Exhaust Cutoff Switch To A Stock Convertible Switch.
TECH Senior Member
Joined: Dec 2001
Posts: 5,399
Likes: 3
From: Jacksonville, FL
TECH Senior Member
Joined: Dec 2001
Posts: 5,399
Likes: 3
From: Jacksonville, FL
A friend of mine gave me this today - excerpt from a thread on the old ls1.com in May 2003:
Use GM harness PN 15306189 - plugs into the back of the conv switch.
Pin B - Illumination
Pin C - Illumination ground
Pin H - Ground
Pin D - Ground
Pin F - Ignition
Pin E - Cut out motor
Pin A - Cut out motor
Don't know if this will help but thought I'd post it.
Use GM harness PN 15306189 - plugs into the back of the conv switch.
Pin B - Illumination
Pin C - Illumination ground
Pin H - Ground
Pin D - Ground
Pin F - Ignition
Pin E - Cut out motor
Pin A - Cut out motor
Don't know if this will help but thought I'd post it.
