ORY vibrating/hitting driver side floor board! best way to fix?
#22
TECH Junkie
Join Date: Dec 2001
Location: Lakeland, FL
Posts: 3,242
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Also the headers will pivot ever so slightly on the bolts and while it is not much at the header it ends up being a good 1/2 inch or so at the header collector. Just loosen the header bolts and hold down on the collector while you tighten a couple, I was able to get my hooker orp to clear this way back in the day.
Don't wanna do that just get a big hammer and a big punch and where its hitting just ping the floorboard in a bit. No biggy. You should see all the banging i had to do to get my duals to clear lol that was a PITA.
Don't wanna do that just get a big hammer and a big punch and where its hitting just ping the floorboard in a bit. No biggy. You should see all the banging i had to do to get my duals to clear lol that was a PITA.
#23
10 Second Club
iTrader: (2)
Join Date: Feb 2002
Location: Hawaii
Posts: 866
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Demon_Speeding
I'll take some pics as soon as I can.
1BADTALS1, I had to play with mine when I had it on the life installing everything, but afterthat I have had no issues in ~ 10 months.
1BADTALS1, I had to play with mine when I had it on the life installing everything, but afterthat I have had no issues in ~ 10 months.
Thanks
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
![Hail](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_hail.gif)