Need Your Input/Help Valvecovers *PIC'S*
Thread Starter
Joined: Aug 2002
Posts: 10,331
Likes: 1
From: San Antonio, TX
Originally Posted by LawmanSS
I attempted to remove the coil bosses from a set of stockers and then have them chromed...the problem that I ran into is getting the divots TIG welded without pits...the welder tried several times, but couldn't get rid of all the pits...therefore, chrome was out. If you are considering powdercoating, then pitting probably wouldn't be as much as a problem. I recommend the aftermarket covers...they give a much cleaner look (IMO)...
didnt you have a set????
Got any pic's of them on??
JMBLOWNWS6,
Dont worry man its all good... It doesnt bother me.
I might try the green in the lines. I do think that would look good.
thanks guys
Kyle
You know what I would say Looks trick none the less but a set of mean valve covers in there. We could even engrave something in them for you. I have an awesome Nasty Logo on a set
Nate
Nate
Thread Starter
Joined: Aug 2002
Posts: 10,331
Likes: 1
From: San Antonio, TX
Originally Posted by Nasty N8
You know what I would say Looks trick none the less but a set of mean valve covers in there. We could even engrave something in them for you. I have an awesome Nasty Logo on a set
Nate
Nate
Ya got a Pic nate..... Ill give ya call in a lil bit....
Kyle
Originally Posted by STANG KILLA SS 2
seems like this thread was more meant to show off you setup than a question about the valve covers.
however id suggest the ones from nasty or have the holes filled.
however id suggest the ones from nasty or have the holes filled.
Go for filling them in. If they don't work out, then drop the dough for Nasty's work.
TECH Fanatic
Joined: Jul 2005
Posts: 1,084
Likes: 1
From: Keller, Texas
Originally Posted by NA$TY-TA
NO.......... wise *** it was started to ask the questions i asked.... the last pic was to show an over all look..... some people are visual.. i guess you are not one of them.......................
yikes it getting catty in here lol
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
Joined: Aug 2002
Posts: 10,331
Likes: 1
From: San Antonio, TX
Originally Posted by CAT3
I'd get the Nates, but get them Billet. When compared to the welded ones, the billet are ultra nice.
I just like the welded ones so much better..... me and Nate both agree it goes with my over all setup....
Kyle
HMMMMMM I'm starting to like the Na$ty Performance ones more. I think you should go with 2 driverside ones and have no oil filler either! Just have to remove 4 little bolts to put oil in
That would be ULTRA slick!
That would be ULTRA slick!
