TB Porting Tips

Reply Subscribe

Thread Tools

Search this Thread

Feb 2, 2006 | 10:25 PM

#21

Jpr5690

TECH Junkie

iTrader: (13)

Joined: Nov 2002

Posts: 3,806

Likes: 0

I Think Its 4.5....but I May Be Wrong

Feb 2, 2006 | 11:45 PM

#22

SSRZ28

Launching!

iTrader: (3)

Joined: Dec 2004

Posts: 275

Likes: 0

From: BAY AREA AND LOS ANGELES

i believe idle should be .50-.65 volts and WOT is anything above 4

Feb 11, 2006 | 11:36 PM

#23

98RedBird

TECH Addict

iTrader: (77)

Joined: May 2005

Posts: 2,773

Likes: 3

From: Peoria, IL

Do not go above 4.70 Volts on the bump stop mod

Feb 12, 2006 | 10:18 AM

#24

vMaster0fPuppets

Thread Starter

TECH Resident

iTrader: (6)

Joined: Jul 2005

Posts: 965

Likes: 0

From: Levittown, PA

i did it to 4.6

Feb 13, 2006 | 10:18 AM

#25

01formula6

TECH Enthusiast

iTrader: (7)

Joined: Mar 2004

Posts: 510

Likes: 1

From: Schaumburg, IL

Good info on the tb porting. What grit sanding drums/flapwheels are you guys using?

Feb 13, 2006 | 11:42 AM

#26

Bo White

TECH Addict

iTrader: (59)

Joined: Oct 2004

Posts: 2,357

Likes: 0

From: Vance, Alabama

120 grit from Standard Abrassives.

Feb 13, 2006 | 09:58 PM

#27

JoeMack

TECH Regular

iTrader: (18)

Joined: Mar 2004

Posts: 401

Likes: 0

I see some people filling in the idle air holes with epoxy before porting. Is it worth the extra work to do it? Any down side? What type of epoxy is used? Thanks

Feb 17, 2006 | 10:41 PM

#28

Camarokidd24

Launching!

iTrader: (14)

Joined: Jun 2005

Posts: 274

Likes: 0

From: Ocala, Florida

most say the epoxy is a bad idea because down the road the epoxy may break down and any particles going into the intake is a bad thing.

LS1 Tech Stories

The Best V8 Stories One Small Block at Time

Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Verdad Gallardo

6 Common C5 Corvette Failures and What's Involved In Repairing Them

Pouria Savadkouei

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Verdad Gallardo

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Pouria Savadkouei

Top 10 Most Powerful Chevy Trucks Ever Made!

Hennessey's New Supercharged Silverado ZR2 Has 700 HP

Verdad Gallardo

Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

Verdad Gallardo

Awesome K5 Blazer Restomod Comes With C7 Corvette Power

Verdad Gallardo

10 Camaros You Should Never Buy

10 LS Engine Myths That Refuse to Die

Verdad Gallardo

Feb 18, 2006 | 12:52 PM

#29

black_z

12 Second Club

iTrader: (4)

Joined: May 2003

Posts: 3,322

Likes: 0

From: Midwest

Quote:

Originally Posted by vMaster0fPuppets

i did it to 4.6

Where do you measure the voltage at?

Feb 18, 2006 | 01:59 PM

#30

JoeMack

TECH Regular

iTrader: (18)

Joined: Mar 2004

Posts: 401

Likes: 0

Quote:

Originally Posted by black_z

Where do you measure the voltage at?

This tells you how to do it:

http://www.ls1camaro.net/sections.ph...ticle&artid=26

Feb 19, 2006 | 10:59 AM

#31

black_z

12 Second Club

iTrader: (4)

Joined: May 2003

Posts: 3,322

Likes: 0

From: Midwest

Thanks for the link,thats simple enough.

Feb 19, 2006 | 09:18 PM

#32

JoeMack

TECH Regular

iTrader: (18)

Joined: Mar 2004

Posts: 401

Likes: 0

Quote:

Originally Posted by black_z

Thanks for the link,thats simple enough.

Feb 19, 2006 | 11:19 PM

#33

black_z

12 Second Club

iTrader: (4)

Joined: May 2003

Posts: 3,322

Likes: 0

From: Midwest

I ported by TB today, and everything went pretty well. I only got to sand it down with 400 grit sand paper though. Will that affect performance at all? Will the smoothest finish possible yield the best results, or would it be very minimal?

Reply Subscribe