Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Ses Light On!!!

Thread Tools
 
Search this Thread
 
Old 02-14-2006 | 12:56 AM
  #1  
98jonws6's Avatar
Thread Starter
On The Tree
iTrader: (5)
 
Joined: Jul 2003
Posts: 113
Likes: 0
From: Winfield, IL
Default Ses Light On!!!

I took my car into speed inc. and my SES light was on they said it was the knock sensor, on the car when they checked it out. they said either one of my wires on my knock sensors is being pinched when the ls6 intake was installed (not by them). or it just needed a new sensor. i need to take my car in for emissions soon and i need this light off. i mean sometimes if i unplug my battery it will be off for a while then it will end up going back on... and sometimes it turns off??? i am confused!!! if it needs new knock sensors how much do those run? where can i get them??? if i left it would it pull timing from the motor to compensate???
Old 02-14-2006 | 09:47 AM
  #2  
Roadhouse's Avatar
TECH Resident
iTrader: (8)
 
Joined: Mar 2005
Posts: 981
Likes: 0
From: Summerville,S.C.
Default

You could call the dealership to get the part numbers and order them through http://www.not-a-sponsor.com/.

Last edited by WILWAXU; 02-15-2006 at 08:54 PM.
Old 02-14-2006 | 01:23 PM
  #3  
Ling_650vette's Avatar
TECH Junkie
iTrader: (1)
 
Joined: Sep 2002
Posts: 3,080
Likes: 0
From: Conroe, TX
Default

Why not just have asked Speed to do the work there? Im sure they've delt with some knock sensors in their time and would've been able to cure the problem.




All times are GMT -5. The time now is 08:40 PM.