Need help choosing gauges for pillar...
Thread Starter
Joined: Jun 2005
Posts: 5,221
Likes: 1
From: Skiatook, OK
Need help choosing gauges for pillar... I was going to get Air/Fuel, Fuel Pressure, & Nitrous. But I decided I am goin to build another motor for nitrous & just run this one N/A.
So what gauges would be best for me???
I was thinking maybe Oil Pressure, Water Temp., & Tranny temp. Although some have told me there is no use for a tranny temp. gauge in a M6.
Any other seasoned guys in here have suggestions. All gauges will have to be electric. I am also wanting to use the Autometer Ultra lite series.
Thankx for any information. I am tryin to order these by the end of the week.
So what gauges would be best for me???
I was thinking maybe Oil Pressure, Water Temp., & Tranny temp. Although some have told me there is no use for a tranny temp. gauge in a M6.
Any other seasoned guys in here have suggestions. All gauges will have to be electric. I am also wanting to use the Autometer Ultra lite series.
Thankx for any information. I am tryin to order these by the end of the week.
Last edited by BIG_MIKE2005; Feb 21, 2006 at 03:59 PM.
Thread Starter
Joined: Jun 2005
Posts: 5,221
Likes: 1
From: Skiatook, OK
Originally Posted by ROCNDAV
Yup I'm looking at Oil Press, Water temp & Fuel Pressure
Just talked to Jon & have decided to go with one of a couple set-ups.
(1) Water Temp. - Oil Pressure - Oil Temp.
(2) Water Temp. - Oil Pressure - Fuel Pressure
(3) Water Temp. - Oil Pressure - Air/Fuel(to monitor O2 sensors only)
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
Joined: Jun 2005
Posts: 5,221
Likes: 1
From: Skiatook, OK
Well I decided to go with my above option #1.
Oil Temp. - Oil Pressure - Water Temp.
I will also be puttin my harlan shift light in the a-pillar, so pics will be posted in the appearance section when its done.
Oil Temp. - Oil Pressure - Water Temp.
I will also be puttin my harlan shift light in the a-pillar, so pics will be posted in the appearance section when its done.