Autometer Gauge
Autometer Gauge Sorry if this isnt the correct place to put this but wasnt sure. I did a search and came up empty handed. Was looking for any info on where to install the sensor for water coolant. And was also curious if any one has ever used just one gauge and had several diffrent sensor tied into a three way switch to use for water,tranny,and oil temps? Any help would be greatly appreciated thanks in advance.
TECH Resident
Joined: Dec 2004
Posts: 845
Likes: 0
From: K-W, Ontario
I would personally install the water temp sensor in the cylinder head.
That's the place where you want to keep an eye on things.
As for coupling one, or more sensors together, you mightl have to calibrate
each sending unit if they are not original AutoMeter senders.
That's the place where you want to keep an eye on things.
As for coupling one, or more sensors together, you mightl have to calibrate
each sending unit if they are not original AutoMeter senders.
TECH Fanatic
iTrader: (4)
Joined: Jul 2003
Posts: 1,075
Likes: 0
From: Orange Park/ Jacksonville, FL
Originally Posted by Adrenaline_Z
I would personally install the water temp sensor in the cylinder head.
That's the place where you want to keep an eye on things.
That's the place where you want to keep an eye on things.
Its at the very back of the head, next to the #8 plug, and a hair higher on the head. If you look at the driver's head, where the stock coolant sensor is at the front of the head, thats the same place the plug is in the passanger head, only at the rear.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
On The Tree
Joined: Apr 2004
Posts: 166
Likes: 0
From: Oslo, Norway, Europe
anyone who has put the sensor somewhere else? im not sure if i want to drill into my head 
, i just installed the oil press sensor on the bracket on the oil filter, so I got the drill and tap ready.
, i just installed the oil press sensor on the bracket on the oil filter, so I got the drill and tap ready. 
