Not the dyno results I expected
Thread Starter
On The Tree
Joined: Nov 2001
Posts: 103
Likes: 0
From: Fowlerville, MI
Not the dyno results I expected I dynoed again at the Superfest on Saturday. I didn't get the results I was expecting. I'm not really an expert on reading the sheet, so any comments from the experts would be appreciated.
The car runs great IMO, but I suppose I could be losing some power somewhere. Maybe a tune with LS1 Edit, lose the cats, different cam ?? Thanks!
Dyno Sheet
The car runs great IMO, but I suppose I could be losing some power somewhere. Maybe a tune with LS1 Edit, lose the cats, different cam ?? Thanks!
Dyno Sheet
Thread Starter
On The Tree
Joined: Nov 2001
Posts: 103
Likes: 0
From: Fowlerville, MI
Re: Not the dyno results I expected Well, I've got AutoTap, but I've never done much with it. I'm not sure what parameters to log. I guess I need to find a good log file to use, and take a drive.
TECH Resident
Joined: Mar 2002
Posts: 770
Likes: 0
From: WA
Re: Not the dyno results I expected Looks good to me. Those number seem to be in the ball park for the combo you have.
???What was the Air temp, humidity, sea level???
It makes alot of differance.
You might try a different cam. Thunder Racing makes some bad *** cams. I like the 224/224 .561 112 SLA <It's one bad *** cam. Check it out.
???What was the Air temp, humidity, sea level???
It makes alot of differance.
You might try a different cam. Thunder Racing makes some bad *** cams. I like the 224/224 .561 112 SLA <It's one bad *** cam. Check it out.
Re: Not the dyno results I expected What were your HP/TQ gains before and after on the same dyno?
I picked up 80 rwhp with TEA Stage 1 heads, hammer cam, max headers.
Eric
www.installuniversity.com
I picked up 80 rwhp with TEA Stage 1 heads, hammer cam, max headers.
Eric
www.installuniversity.com
Staging Lane
Joined: Jul 2002
Posts: 69
Likes: 0
From: El Paso
Re: Not the dyno results I expected Sucks not to get the horsepower that you want when you spend a lot of money. I can tell you that you need to get a larger lift on your cam to get the horsepower that you are looking for.
