LS6 Install Help Needed

Reply Subscribe

Thread Tools

Search this Thread

Mar 27, 2006 | 07:39 PM

99 31U VERT

Thread Starter

Staging Lane

iTrader: (11)

Joined: Mar 2003

Posts: 74

Likes: 0

From: Pennsylvania

LS6 Install Help Needed

Well, I've already broken the Oil Sending unit and some friggin' solenoid vacuum fitting. I cannot get the fuel line separated from the fuel rail. Any advice as to how to remove the fuel line from the rail? Also, did I screw the fuel lines by bending & twisting the fuel rail to set it off to the side? The frustration level continues to grow, and I'm not even drinking any beer during this. The help is always appreciated. Thanks for the opportunity to vent as well...

Mark

Mar 27, 2006 | 07:43 PM

HeapaShifter

TECH Resident

iTrader: (2)

Joined: Jan 2006

Posts: 845

Likes: 0

From: Myrtle Beach, SC

You need a fuel line quick disconnect tool. Napa or any similar store will have it. The lines should be ok as long as you didn't kink them.

Mar 27, 2006 | 08:03 PM

slow trap

TECH Addict

iTrader: (22)

Joined: Sep 2004

Posts: 2,639

Likes: 0

From: tennessee

get the fuel line remover that is hinged in the middle,it has 2 sizes and is much better than those plastic ones,well it worked better for me anyways.