External Fuel Pump
Thread Starter
TECH Junkie
iTrader: (4)
Joined: Jul 2002
Posts: 3,078
Likes: 0
From: Atlanta, Georgia!
External Fuel Pump I’m new here, but have been reading the posts off and on for a couple of months now. I have a great respect for the knowledge and skills of the vets, keep up the good work. Well so much for the introduction and on to my question.
I will be putting an LS1/T56 into a kit car (Classic Roadsters Sebring MX). The fuel tank is too shallow to use an in tank pump so I need an external setup with a regulator. Can you guys recommend one? Does the computer interface in with the fuel pump?
Thanks
I will be putting an LS1/T56 into a kit car (Classic Roadsters Sebring MX). The fuel tank is too shallow to use an in tank pump so I need an external setup with a regulator. Can you guys recommend one? Does the computer interface in with the fuel pump?
Thanks
TECH Enthusiast
Joined: Dec 2001
Posts: 742
Likes: 0
From: Pismo Beach, CA
Re: External Fuel Pump hey. im not sure if this is what ur looking for, but try this. http://www.ls1speed.com/catagory.cfm?catagory=fuel
its the 2nd one down. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
its the 2nd one down. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Thread Starter
TECH Junkie
iTrader: (4)
Joined: Jul 2002
Posts: 3,078
Likes: 0
From: Atlanta, Georgia!
Re: External Fuel Pump Yea, that does. I left those folks an email. Thanks. I'll be recieving my 99 LS1/T56 on friday and I'm anxious to get busy. Hopefully adapting the LS1 motor mounts to fit a standard chevy small block setup wont be too hard, although It looks as though I might have to do a little fabrication. Setup should haul! The total weight is around 2450. Rearend is an 8.8 traction lock 3.73 mounted with steeda adjustables.
