Does The IAT Timing Tricker Mod Work?
09-24-2002, 05:25 PM
#3
TECH Fanatic
Join Date: Jan 2002
Location: Stuart Fl
Posts: 1,376
Likes: 0
Received 0 Likes
on
0 Posts
Re: Does The IAT Timing Tricker Mod Work? With the tricker, on the scanmaster, it showed incoming air temp as 38* But I saw no improvement at the track. I took it off and on many times. No change for me. I let the cat play with it now!
09-29-2002, 12:30 AM
#4
Teching In
Join Date: Sep 2002
Location: Winter Springs, Florida
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Re: Does The IAT Timing Tricker Mod Work? Just use an 8100 ohm resistor in the IAT.connector and you have the same timing tricker for 20 cents! it works on some cars but not others,probably likes cammed vehicles.Good Luck
09-29-2002, 07:10 AM
#5
TECH Resident
iTrader: (3)
Join Date: Mar 2002
Location: wilmington delaware
Posts: 919
Likes: 0
Received 0 Likes
on
0 Posts
Re: Does The IAT Timing Tricker Mod Work? it worked ok for me before i got my maft to tune my car with. back to back passes in 80 degree weather near identical 60ft, only change being the timing tricker i gained half a mph so thats maybe 5hp. not bad for a buck. but after i got the maft to tune the car the timing tricker mod doesnt work anymore, it just gives me knock.
09-30-2002, 06:47 PM
#6
TECH Apprentice
iTrader: (4)
Join Date: Nov 2001
Location: lebanon, ohio
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
Re: Does The IAT Timing Tricker Mod Work? didnt do a single thing with my 00 TA 2 years ago, ran back to back passes with it on and off, no difference. never tried it with my current 99 formula, stock it seemed to be tuned perfectly... <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />
10-02-2002, 03:24 PM
#7
TECH Fanatic
iTrader: (3)
Join Date: Mar 2002
Location: Pontiac, MI
Posts: 1,364
Likes: 0
Received 0 Likes
on
0 Posts
Re: Does The IAT Timing Tricker Mod Work? On a stock 2002 Firehawk, starting at 40 C, the ECM starts removing timing (1 degree),and 50 C and up it pulls three degrees of timing. There is no add in the table, only subtract. I zeroed the table with LS1-Edit, but the resistor does the exact same thing. Just make sure you don't have any knock retard in hot weather and you should be OK.
-Geoff
-Geoff
