FAN SWITCH PROBLEMS
Thread Starter
Teching In
Joined: Feb 2002
Posts: 24
Likes: 0
From: JACKSONVILLE
FAN SWITCH PROBLEMS I had the manual fan switch set up before but had to disconnect it cuz it was shorting things out cuz it was touching some other stuff, I fixed the problem but now when i put the connectors back into the bottom of the fusebox I can only get both fans to come on low or one fan to come on high what wires do i put the connectors to on the bottom of the fuse box to make both fans stay on high???
Thanks
Thanks
On The Tree
Joined: Aug 2002
Posts: 187
Likes: 0
From: Louisville, KY
Re: FAN SWITCH PROBLEMS The free fan mod I assume?? I did this jsut a couple weeks ago. Im not sure if mine are on high or low, but they cool it just fine. I just installed two wires from the FAN#1 relay in the engine bay. You can fine the wires under the fuse thing, ones blue and the power(you can use any power) is red. Just connect that to a switch and they both come on. REALLY easy set up..
Re: FAN SWITCH PROBLEMS Yeah, LS1info.com, or LS1.com or LS1mods.com, under mods, free fan switch yada yada yada. Blue wire from #1fan relay yep, and power wire and a ground onto switch, both fans on low. Using a jumper from #1 to #2 relay and both fans on hi. Theres also another Cheap fan mod switch. Using an adjustable switch and all that stuff under the same web sites.
Does anyone know where to get the shims for the thermostat mod? TIA.
Charlie.
Does anyone know where to get the shims for the thermostat mod? TIA.
Charlie.
