PS pump pulley install problems
Thread Starter
Staging Lane
iTrader: (3)
Joined: Nov 2005
Posts: 84
Likes: 0
From: Rio Rancho,NM USA
PS pump pulley install problems I went to install a new pulley on my power steering pump and actually broke the installer trying to do it. The pulley got real tight about 3/16" from all the way on and broke the bolt on the tool-any ideas here? Should you lube the shaft first? Oh yea, C5 type pump.
Thanks for any advice
Thanks for any advice
Thread Starter
Staging Lane
iTrader: (3)
Joined: Nov 2005
Posts: 84
Likes: 0
From: Rio Rancho,NM USA
Don't know who made the tool, my son had it in his box but I'm sure it was some off brand. I'm going to get a grade 8 bolt and use a nut and washers tonight and see if I can pull it on the rest of the way.
