extending 02 sensor
extending 02 sensor My seller with 02 extension has backed out, so I am going to make my own 02 extension. My queston is what gauge wire do I need. Some one said if I use the wrong wire it will still set off a code. Any help would be appreciated.
I extended mine after they burned up a bit. I just eyeballed it, but if you're worried just go a bit thicker and you'll be fine.
Just make sure you're connecting the right wires together. I believe there are 4 all together.
Just make sure you're connecting the right wires together. I believe there are 4 all together.
yeah i just did the same thing when my o2 sensor plug burnt up from the contact with the header since the extension was to long, and i just use the rear O2s plug and cut it where i need it and spliced the new plug to the front O2s wiring. problem fixed.
Originally Posted by ohsofast
Would I be able to go to advanced and get that gauge wire, someone here said they have it at Home Depot
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo actually the two wires that are the same color are the brown wires not the purple wire. just look at the plug itself and match it up before you cut it and then remember which is which, plus they are labeled with A,B,C, and D so just remember and dont mix those two wires up.
