LS2 vs. LS6 intake manifold
05-14-2006, 11:46 AM
#1
Teching In
Thread Starter
Join Date: Jul 2005
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
LS2 vs. LS6 intake manifold Hey Guys i have a big problem, I have an ls2 manifold on my motor and i have stock ls1 injectors... They don't fit. I was hoping to find out of the ls2 requires bigger injectors, i think the wire plugs are different. Please let me know.
-Peter
-Peter
05-14-2006, 04:15 PM
#6
On The Tree
iTrader: (1)
Join Date: Sep 2005
Location: Texas
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
You need an LS2 fuel rail to run it on an LS1/6 engine. You also need to either buy Katech's spacer and o-ring kit, or make your own using shims and some stock LS1 o-rings. That will allow you to run the LS2 intake with LS1 style injectors.
There is alot of talk about this in the past year on the conversion forum and the LS2 forum.
There is alot of talk about this in the past year on the conversion forum and the LS2 forum.
05-14-2006, 10:45 PM
#7
Originally Posted by gogogadget
You need an LS2 fuel rail to run it on an LS1/6 engine. You also need to either buy Katech's spacer and o-ring kit, or make your own using shims and some stock LS1 o-rings. That will allow you to run the LS2 intake with LS1 style injectors.
There is alot of talk about this in the past year on the conversion forum and the LS2 forum.
There is alot of talk about this in the past year on the conversion forum and the LS2 forum.
