I was wondering if there is an adapter that converts the 3/8" fitting on the fuel line that connects to the fuel rails to a 6an or 8an?

 

Thank you, thank you, thank you <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

 

before you dump a bunch of cash in the fuel system, take not that the stock rails are really restrictive, maybe more than the stock lines.

 

mighymouse...
at what hp level would you estimate the stock rails will become an issue?
thanks
~John

 

this should do it...

https://ls1tech.com/ubb/cgi-bin/ulti...;f=21;t=000264

https://ls1tech.com/ubb/cgi-bin/ulti...;f=24;t=001721

http://www.performanceplumbing.com/Pure_Choice.shtml

 

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by MIGHTYMOUSE:
<strong> before you dump a bunch of cash in the fuel system, take not that the stock rails are really restrictive, maybe more than the stock lines. </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Exactly! I want to use the stock fuel line and replace the fuel rails. The apadter I need will connect the stock fuel line( 3/8" connector ) to a 6an fitting on the rail. I do not think that the talked about adapter will work. It looks like it for stock fuel rails to use SS braid line.

 

ttt