HEADER POLL
Re: HEADER POLL Sorry,couldn't vote didn't like any of the choices <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
For money,clearence,ect I'd say Hookers(coated)
BTW,I own FLP's because Hookers were not out yet <img border="0" title="" alt="[Frown]" src="gr_sad.gif" />
For money,clearence,ect I'd say Hookers(coated)
BTW,I own FLP's because Hookers were not out yet <img border="0" title="" alt="[Frown]" src="gr_sad.gif" />
TECH Addict
Joined: Dec 2001
Posts: 2,337
Likes: 0
From: Auburn, AL
Re: HEADER POLL I have a 2002 and have Hookers. They work fine, all you do is plug the EGR tube with a block-off plate. They have the best ground clearance of any long tube, have a very functional design, and are cheap.
But, if I was doing it all over again, I would probably have waited and gone with Thunder Racing's 1 7/8" race headers. That is because I don't need any emissions fittings, I don't wanna have to buy another set of headers when I go hog-wild on the engine, and I love Thunder's products.
But, if I was doing it all over again, I would probably have waited and gone with Thunder Racing's 1 7/8" race headers. That is because I don't need any emissions fittings, I don't wanna have to buy another set of headers when I go hog-wild on the engine, and I love Thunder's products.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
Thread Starter
On The Tree
Joined: May 2002
Posts: 149
Likes: 0
From: Indian Trail N.C.
Re: HEADER POLL </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Bounce?:
<strong> if you are installing an ORP, why do you have cats on it?.. <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">As I stated above I haven't read very good things about the cats that come in the "package deals" like Mac etc. If you knoew of a header package that comes with decent cats by all means let me know. I was just reading about the PPC products as noted above your post and it seems they offer a package with Random Cats. I'm going to read some more to make sure.
<strong> if you are installing an ORP, why do you have cats on it?.. <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">As I stated above I haven't read very good things about the cats that come in the "package deals" like Mac etc. If you knoew of a header package that comes with decent cats by all means let me know. I was just reading about the PPC products as noted above your post and it seems they offer a package with Random Cats. I'm going to read some more to make sure.
TECH Addict
Joined: Dec 2001
Posts: 2,337
Likes: 0
From: Auburn, AL
Re: HEADER POLL Just a FYI, Mufflex designed their y-pipe for the Hooker headers to allow Carsound cats to fit. I'm sure the bullet Random Techs will fit as well, but maybe not the longer ones.
Thread Starter
On The Tree
Joined: May 2002
Posts: 149
Likes: 0
From: Indian Trail N.C.
Re: HEADER POLL </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by TJF:
<strong> Take a look at what our sponser PPC has to offer.
Give Gordon a call - sweet products. </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Very Nice but also very $$$. However it is a package deal with everything I'd need in one shot. How about ground clearance? Maybe I need to do a another poll and include a few more <img border="0" alt="[bang head]" title="" src="graemlins/gr_banghead.gif" />
<strong> Take a look at what our sponser PPC has to offer.
Give Gordon a call - sweet products. </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Very Nice but also very $$$. However it is a package deal with everything I'd need in one shot. How about ground clearance? Maybe I need to do a another poll and include a few more <img border="0" alt="[bang head]" title="" src="graemlins/gr_banghead.gif" />
TECH Enthusiast
Joined: Feb 2002
Posts: 636
Likes: 0
From: HTownRacing.com, TX
Re: HEADER POLL </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Very Nice but also very $$$. However it is a package deal with everything I'd need in one shot. How about ground clearance? Maybe I need to do a another poll and include a few more <img border="0" alt="[bang head]" title="" src="graemlins/gr_banghead.gif" /> </font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">this header system is the same design as the QTP/ Thunder headers in that they all come from the same header manufacturer and just marketed/ sold under different licensed names. The header itself will have the same clearance, just the difference will be in the y-pipe since each provider has produced their own.
Re: HEADER POLL There is some guy who sells MAC's on E-Bay all the time. I got a set of brand new coated MAC's with ORY pipe for $414. I want to go turbo eventually, so I did not want to sink a lot in headers. Some guys have made great HP with MAC's, but for purely racing, LT's give you more HP up top.
-Geoff
-Geoff
Thread Starter
On The Tree
Joined: May 2002
Posts: 149
Likes: 0
From: Indian Trail N.C.
Re: HEADER POLL </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by ratio411:
<strong> You didn't offer me the option... <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />
The correct answer to all of your questions is Hooker L/Ts. </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif"><img border="0" alt="[bang head]" title="" src="graemlins/gr_banghead.gif" /> Maybe I need to do a another poll and include a few more
<strong> You didn't offer me the option... <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />
The correct answer to all of your questions is Hooker L/Ts. </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif"><img border="0" alt="[bang head]" title="" src="graemlins/gr_banghead.gif" /> Maybe I need to do a another poll and include a few more
TECH Addict
Joined: Dec 2001
Posts: 2,337
Likes: 0
From: Auburn, AL
Re: HEADER POLL </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by X']['C WS6:
<strong> </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Very Nice but also very $$$. However it is a package deal with everything I'd need in one shot. How about ground clearance? Maybe I need to do a another poll and include a few more <img border="0" alt="[bang head]" title="" src="graemlins/gr_banghead.gif" /> </font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">this header system is the same design as the QTP/ Thunder headers in that they all come from the same header manufacturer and just marketed/ sold under different licensed names. The header itself will have the same clearance, just the difference will be in the y-pipe since each provider has produced their own. </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">I am almost positive that this is wrong. The headers are all based on the old Grot design, but there is no more Grot headers made.
<strong> </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Very Nice but also very $$$. However it is a package deal with everything I'd need in one shot. How about ground clearance? Maybe I need to do a another poll and include a few more <img border="0" alt="[bang head]" title="" src="graemlins/gr_banghead.gif" /> </font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">this header system is the same design as the QTP/ Thunder headers in that they all come from the same header manufacturer and just marketed/ sold under different licensed names. The header itself will have the same clearance, just the difference will be in the y-pipe since each provider has produced their own. </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">I am almost positive that this is wrong. The headers are all based on the old Grot design, but there is no more Grot headers made.
TECH Enthusiast
Joined: Feb 2002
Posts: 636
Likes: 0
From: HTownRacing.com, TX
Re: HEADER POLL honestly if you are doing the whole heads/cam deal you will be searching to get every availiable hp out of this new setup. spend the extra here to get the efficiency of longtubes, as to not "suffocate" your [new] engine.
macs will be great for ground clearance but again so are shortie style headers, and will help out in the 4500-7000 rpm range.
a good longtube will give you the low end torque and consistency to capitalize on your investment.
macs will be great for ground clearance but again so are shortie style headers, and will help out in the 4500-7000 rpm range.
a good longtube will give you the low end torque and consistency to capitalize on your investment.
Thread Starter
On The Tree
Joined: May 2002
Posts: 149
Likes: 0
From: Indian Trail N.C.
Re: HEADER POLL </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif"> a good longtube will give you the low end torque and consistency to capitalize on your investment. </font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">That's a very good point and makes me lean torward an LT. I just don't want to gut them open because of ground clearance but from what I've read the QTP's and the Hooker's (if I can make them work with cats) have the best clearance for the LT's.
