Asp underdrive pulleys
Thread Starter
Launching!
iTrader: (5)
Joined: Feb 2006
Posts: 213
Likes: 1
From: some where in the Chi
Asp underdrive pulleys I just got them in the mail and I need to get some belts for them. The instructions call for gates belts but i went to the part store and cant seem to find them. Any one with these pulleys running something different? I got the crank and alt pulleys. Also how did you guys get the brank bolt torqued down to 240 ft lbs.? cuz my wrench only goes to 180. Please help 
On the tree
Joined: May 2004
Posts: 643
Likes: 0
The torqueing sequence from SLP say to get it to 240ft/lbs then remove the bolt. Then use a new bolt and go to 37ft/lbs. Once at that setting mark the bolt and then turn the bolt 140 degrees.
I used a 3ft torque wrench in order to get mine there and still only got to maybe 100 degrees.
My SLP pullies said which belts to use and I got mine at Oriellys
I used a 3ft torque wrench in order to get mine there and still only got to maybe 100 degrees.
My SLP pullies said which belts to use and I got mine at Oriellys
it calls for a gates k060760 and k040378. heres what i did. the last 3 numbers are the length and the first 2 are the ribs. so the k060760 is 76 inches and the k040378 is 37.8. as far as i know all belts have this same coding.
Thread Starter
Launching!
iTrader: (5)
Joined: Feb 2006
Posts: 213
Likes: 1
From: some where in the Chi
Originally Posted by michaelsvt03
it calls for a gates k060760 and k040378. heres what i did. the last 3 numbers are the length and the first 2 are the ribs. so the k060760 is 76 inches and the k040378 is 37.8. as far as i know all belts have this same coding.
