Custom True Duals
#41
12 Second Club
iTrader: (9)
Join Date: May 2005
Location: Abilene, Tx
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 98hardtopZ
you have to have either an x or h to equalize pressure...
I have a bud whos running them straight back over the axle with no x or h and Id have to say it sounds awesome. It runs great too so Im not soo sure you need an H or X.
#42
Originally Posted by Gauge
It's hard to tell from this pic, but it kind of looks like the pipe may interfere with the spring if you didn't have coilovers. Can you confirm or deny this? I'm really interested in trying to get someone local to do this for me, but I've been told that it cannot be done.
I'm undescribably envious, by the way.
I'm undescribably envious, by the way.
#43
TECH Regular
Join Date: Feb 2005
Location: Elizabeth City, NC
Posts: 433
Likes: 0
Received 0 Likes
on
0 Posts
Also you dont have to TiG weld stainless, it can be MiG welded with er308 or er316 wire and pure argon. Or OA welded but it would take longer since you have to back gas most likely.
#44
Race your car!
iTrader: (50)
I wish there was someone in CT that could do something like that. I could even live with teh non-stainless.. I'd just paint it black with some good high temp black paint.
I do have a question.. the wiring and whatnot on the drivers side.. what did you do to prevent this from getting heat damage.. I assume you had to do something to insulate it from the heat yes? That was my only concern about doing that type of setup on the drivers side, the heat from the pipes messing with the wiring.
I was considering having something like this done, but run both pipes down the passenger side and over the axle, into a couple of those chrome mufflers that the import guys use.. if there's any that are actually quiet.... I think they would look good in the transam bumper cover cutouts... but I've had zero luck finding out A) how those mufflers will sound with a healthy 402 huffing thru them, and B) actually findind someone that can do it.... finding someone that can and is willing to do it. I even wanted to put a set of the tiny little cat's that magnaflow came out with right at the end of my header collectors.. and the one shop that I found that could probably do it didn't want to.
Stupid CT emissions. Nice setup though! sound clip please....
I do have a question.. the wiring and whatnot on the drivers side.. what did you do to prevent this from getting heat damage.. I assume you had to do something to insulate it from the heat yes? That was my only concern about doing that type of setup on the drivers side, the heat from the pipes messing with the wiring.
I was considering having something like this done, but run both pipes down the passenger side and over the axle, into a couple of those chrome mufflers that the import guys use.. if there's any that are actually quiet.... I think they would look good in the transam bumper cover cutouts... but I've had zero luck finding out A) how those mufflers will sound with a healthy 402 huffing thru them, and B) actually findind someone that can do it.... finding someone that can and is willing to do it. I even wanted to put a set of the tiny little cat's that magnaflow came out with right at the end of my header collectors.. and the one shop that I found that could probably do it didn't want to.
Stupid CT emissions. Nice setup though! sound clip please....
#45
Originally Posted by JL ws-6
.I do have a question.. the wiring and whatnot on the drivers side.. what did you do to prevent this from getting heat damage.. I assume you had to do something to insulate it from the heat yes? That was my only concern about doing that type of setup on the drivers side, the heat from the pipes messing with the wiring.