shows what i know 
CME pics needed!!!
CME pics needed!!! i just got ahold of CME exhaust and will be doing some custom fabbed exhaust bending with stainless piping, but i need some ideas as to how the piping is ran from other CME cars. post up some pics for me!! thanks fellas!
If you are using a Y-pipe/I-pipe then it is the same as any F-Body exhaust until after the muffler (it is actually the SLP dual/dual set-up with the CME tips). If you are doing duals then that is another matter...
Originally Posted by Azrael
If you are using a Y-pipe/I-pipe then it is the same as any F-Body exhaust until after the muffler (it is actually the SLP dual/dual set-up with the CME tips). If you are doing duals then that is another matter...
Originally Posted by Magnet
mines GMMG???
The stock CME is the SLP Dual/Dual with the CME tips.
With our CME we did an adaptation with Magnaflow though for a little more volume.
Here are a couple from the rear, I will get pictures of the bends tomorrow.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
As you can see in the bottom pic we no longer have the stock CME (you can see the shiny Magnaflow muffler). The bends had to be cut and welded for the slightly narrow MF muffler but I can get pics of the bends anyway if you want them. Hold on and I will edit this post in a few with the pics...
Last edited by Azrael; Nov 3, 2006 at 09:44 PM.
3" TDs.. 
and coming from a friend with the regular cme tips, the center part that holds them together breaks fairly often...he's lookin to get the same tips i have (from ebay) (stainless steel)
and coming from a friend with the regular cme tips, the center part that holds them together breaks fairly often...he's lookin to get the same tips i have (from ebay) (stainless steel)
