Breather cap
Thread Starter
TECH Addict
iTrader: (3)
Joined: Apr 2005
Posts: 2,905
Likes: 0
From: Northern Kentucky
Breather cap ive looked at autozone and all over and found one on some of the websites but where can i get a breather filter that screws right into the oil filler cap??? i have one on now but its the full metal one with holes at the bottom that you can get at autozone. I want the kind that is a wrap around filter and screws right in no problem.
im guessing this is what your looking for at the bottom of the page...
http://www.thunderracing.com/catalog...vid=3&pcid=276
http://www.thunderracing.com/catalog...vid=3&pcid=276
TECH Senior Member
iTrader: (1)
Joined: Apr 2005
Posts: 8,807
Likes: 0
From: Vancouver,[KITSILANO].B.C. Canada *WestCoast*
Originally Posted by texinteg
Why not just drill a one inch hole in the top of you oil fill cap and use a push in style breather with some rtv to hold it in place?
............ 
Trending Topics
Originally Posted by Z28LS1camaroguy
yeah thats the kind of breather but i need to find one that screws right into the oil filler neck.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
I can't believe you guys don't know about these..
LS1speed has JUST what you want.. I just got mine. They have the helix to mount to your valve cover..
Down towards the bottom..
http://www.ls1speed.com/catagory.cfm?catagory=Engine
LS1speed has JUST what you want.. I just got mine. They have the helix to mount to your valve cover..
Down towards the bottom..
http://www.ls1speed.com/catagory.cfm?catagory=Engine
On The Tree
Joined: Jun 2006
Posts: 199
Likes: 0
From: La.
Valve Cover Breathers I hope you fellas know that if you have a near stock LS-1 & install one of these breathers you will screw up Chevy's closed system & cause a loss of acceleration~gas mileage~vacuum ie , performance.
Originally Posted by ls1wfo
I hope you fellas know that if you have a near stock LS-1 & install one of these breathers you will screw up Chevy's closed system & cause a loss of acceleration~gas mileage~vacuum ie , performance.
Originally Posted by ls1wfo
I hope you fellas know that if you have a near stock LS-1 & install one of these breathers you will screw up Chevy's closed system & cause a loss of acceleration~gas mileage~vacuum ie , performance.
Thread Starter
TECH Addict
iTrader: (3)
Joined: Apr 2005
Posts: 2,905
Likes: 0
From: Northern Kentucky
well thats odd that alot of LS1 guys do it, if its useless then why do they make them?? ive had no problems and no loss of anything so i dont see where you are getting it will screw **** up.
Thread Starter
TECH Addict
iTrader: (3)
Joined: Apr 2005
Posts: 2,905
Likes: 0
From: Northern Kentucky
Well he just isnt making sense, alot of the older muscle cars use breathers and there are quiet a few guys on here who delete there PCV systems and run breathers with no problems at all, i dont see where he is getting his info.