QTP controller
Thread Starter
8 Second Club
iTrader: (9)
Joined: Oct 2005
Posts: 1,085
Likes: 0
From: Ellicott City,MD
QTP controller Does anyone have one of these yet? http://www.quicktimeperformance.com/Controller/
Do you like it? How does it operate?
Do you like it? How does it operate?
TECH Resident
Joined: Aug 2005
Posts: 762
Likes: 0
Got one. I like it. I seem to open and close my cutout alot more now with the
controller. I have the partial open setting at 10% and 30%. The 10% give a nice low rumble. I put mine with double sided velco tape to the dash board. If your gonna get the qtp cutout spring for the controller.
controller. I have the partial open setting at 10% and 30%. The 10% give a nice low rumble. I put mine with double sided velco tape to the dash board. If your gonna get the qtp cutout spring for the controller.
Originally Posted by Ragtop 99
pretty cool idea. Too bad it isn't available just as two switches for a more integrated look when installed
The controller operates single or duals. Comes with 2 connectors. Cleaner than toggle switches and more fun.
The trigger wire hooks up to any activated ground wire like a WOT switch, RPM switch etc. When grounded it will open the valve. So you can have the cutout open up via WOT, RPM or any other e management.
That is cool.. If I didn't drive my car in the winter here in chicago I'd probably pick one of these cutouts up with the controller. I'd totally set it to come open with a WOT switch.
