90/90?
90/90? Does the fast 90 intake use the same hardware as the ls6? What is the best TB for this set up? What mass air sensor should I use? Where can I get these items for a good price?
Thanks Aaron
Thanks Aaron
you will need a 90mm tb to match the intake opeaning on the manifold. the bolt pattern is different i believe also than the ls6. and any of the sponsors can help you out with a purchase 
TECH Fanatic
Joined: May 2003
Posts: 1,292
Likes: 6
From: RainbowCity,Alabama
Originally Posted by 2000ZNight
Does the fast 90 intake use the same hardware as the ls6? What is the best TB for this set up? What mass air sensor should I use? Where can I get these items for a good price?
Thanks Aaron
Thanks Aaron
Call TSP they have they best price for the 90MM combo.
Originally Posted by Terry@RacetechSpeed
Call TSP they have they best price for the 90MM combo.
We just put down 460rwhp through and LS6 intake, MS3 (237/242 .603 .609 113LSA), PRC stage 2.5 5.3L heads (1199 assembled )
We are swapping the FAST 90/90 onto the car today, I will post up the GAINS and disprove this immediately.
We had a fast 90/90 pick up over 30 on a 98 H/C car last week coming from the LS1 manifold.
Thank You.
Still waiting after the results from ZACH @ TEXAS-SPEED about the improvement between the LS6 and the 90/90 combo
Christian
Last edited by miami993c297; Nov 19, 2006 at 03:12 PM.
Originally Posted by miami993c297
FROM ZACH :
We just put down 460rwhp through and LS6 intake, MS3 (237/242 .603 .609 113LSA), PRC stage 2.5 5.3L heads (1199 assembled )
We are swapping the FAST 90/90 onto the car today, I will post up the GAINS and disprove this immediately.
We had a fast 90/90 pick up over 30 on a 98 H/C car last week coming from the LS1 manifold.
Thank You.
Still waiting after the results from ZACH @ TEXAS-SPEED about the improvement between the LS6 and the 90/90 combo
Christian
We just put down 460rwhp through and LS6 intake, MS3 (237/242 .603 .609 113LSA), PRC stage 2.5 5.3L heads (1199 assembled )
We are swapping the FAST 90/90 onto the car today, I will post up the GAINS and disprove this immediately.
We had a fast 90/90 pick up over 30 on a 98 H/C car last week coming from the LS1 manifold.
Thank You.
Still waiting after the results from ZACH @ TEXAS-SPEED about the improvement between the LS6 and the 90/90 combo
Christian
Originally Posted by 1 BLOWN V8
I would like to see this also. Also what motor are they doing it on. A stroker or a LS1?
https://ls1tech.com/forums/generation-iii-internal-engine/606697-results-etp-heads.html
asa Zach will be in better shape the results will be there for sure, with the 5.3l head I guess it's a 347Ci.
Christian
