Changing to SD with FAST 90
Changing to SD with FAST 90 So I bought a FAST 90 LSX Intake and NW TB from a user on the board, and I'm going to go ahead and bolt it up to the car, even though it won't make a very big difference until I get it ported and get heads/cam.
But, I've been researching what I need to get to make this work. The intake is supposed to come complete as shipped from any dealer.
I can't find any 85mm lids, and it seems that they don't matter much anyway, so I'm just going to reuse my old TSP lid (unless you guys change my mind), remove my MAF, and use a 4.00" 3-ply Black Silicone coupler (hightempsilicone.com) to connect the lid to the TB. I also am ordering two 3.5-4.0" ID (fits from 3.56-4.50") Linear Stainless Clamps to hold it in place.
Is this correct? Is this all I need? Should I consider doing things any other way?
But, I've been researching what I need to get to make this work. The intake is supposed to come complete as shipped from any dealer.
I can't find any 85mm lids, and it seems that they don't matter much anyway, so I'm just going to reuse my old TSP lid (unless you guys change my mind), remove my MAF, and use a 4.00" 3-ply Black Silicone coupler (hightempsilicone.com) to connect the lid to the TB. I also am ordering two 3.5-4.0" ID (fits from 3.56-4.50") Linear Stainless Clamps to hold it in place.
Is this correct? Is this all I need? Should I consider doing things any other way?
That's almost exactly what I did to mine, only with the stock LS6 intake and ported throttle body. I just run an SLP air lid with a 3" long, 4" diameter coupler from HTS...that coupler holds on to the lid on one side and on the other to a 4" diameter short length of aluminum pipe, and on the other side of the pipe is a 4" hump hose from HTS that connects the aluminum pipe to my throttle body.
Originally Posted by MeentSS02
That's almost exactly what I did to mine, only with the stock LS6 intake and ported throttle body. I just run an SLP air lid with a 3" long, 4" diameter coupler from HTS...that coupler holds on to the lid on one side and on the other to a 4" diameter short length of aluminum pipe, and on the other side of the pipe is a 4" hump hose from HTS that connects the aluminum pipe to my throttle body.
It'll need to be longer than their 3" length standard size...I'd guess it'd need to be 7-8" long total. You could probably get a longer piece and cut it down to size...
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
Originally Posted by RoastEmSS
o yea, i forgot they dont have the black one on their website.. u have to call for it. ask for the black 4x6 intake hose with the rings
http://intakehoses.com/Merchant2/mer...ory_Code=CACH5
