ArcticZ

Hello,

I installed the a switch in my 2001Z and now I am getting an SES light. The code is "Fan 1 Circuit Malfunction" I did the mod just like it explains at www.ls1.com

TIA

Stephen <img src="images/icons/confused.gif" border="0"> <img src="gr_sad.gif" border="0">

RyanJ

hey...i re-wrote that mod! cool. <img src="gr_stretch.gif" border="0"> if you start your car with the fans already on you will get a light. it will go away shortly and has NO performance issues. let me know if you have any trouble. also, if you have the fans on high, you'll always set a code.

ArcticZ

So, if I have my switch on and start the car, the SES will come on? Or if the computer has the fans on and I turn on my switch it will set an SES??

Stephen

CUJO98TA

iTrader: (1)

Chech your fuses under the hood. I think it is one of the big orange ones.

Jeff
<img src="graemlins/burnout.gif" border="0" alt="[Burnout]" />

RyanJ

if you start the car with the fans on Manually.

Ryan

ArcticZ

I was just cruisin down the road and reached down and turned on the fans and when I turned them on, The SES turned on?

Stephen

ArcticZ

<img src="graemlins/burnout.gif" border="0" alt="[Burnout]" /> ttt

DailyAluminumBlock

I get the light when I turn on my fans in two back to back periods of running the car. I mean start the car and then turn on the fans, turn off the fans, turn off the car, start the car, turn on fans, ses light, goes away after running the car through two more cycles without running the fans manually.