MADCOW

iTrader: (1)

I got the Hooker long tubes and decided I'm going with duals. I rounded up two 2.75" factory catbacks off of a pair of 95 Z28's. They have a 90 degree bend towards the center of the car then another 90 degree bend straight back. With these on each side and the drivers side flipped around they will come together. Then I'm going to weld in a crossover tube making an h-pipe. I also got a pair of regular dynomax mufflers off of a buddy.
These are small enough that I should be able to fit them under the car without having ground clearance issues. I will take pictures soon to give anyone interested an idea of how to make there own inexpensive dual exhaust. My only down fall might be the mufflers but I can always switch to another muffler if I want. <img src="graemlins/gr_cheers.gif" border="0" alt="[cheers]" />

CHRISPY

ha! that is a cool idea!
Good luck,
Chris
ps- It is going to be DAMN loud <img src="gr_grin.gif" border="0">
Chris

guadofreak

iTrader: (1)

That is a smart idea AND you get the stainless steel! keep us posted!

2000SS

man thats cool,please post pictures when its
finished.

thanks
wayne

MADCOW

iTrader: (1)

Hopefully I'll have some pictures by the weekend. I can't wait to hear it. I only have a flowmaster catback right now. <img src="graemlins/camaro.gif" border="0" alt="[Chevrolet]" />

NataSS Inc

iTrader: (9)

I gotta see this when your done!

MADCOW

iTrader: (1)

I don't know how to post pictures on this site, but if you want to see a picture of what the duals are going to look like then go to my website.

<img src="graemlins/fluffy.gif" border="0" alt="[Fluffy]" />

MADCOW

iTrader: (1)

Whoops. Here it is www.angelfire.com/clone/mtracing

Dave

You could even put it up on Install University! <img src="gr_grin.gif" border="0">
<img src="graemlins/gr_cheers.gif" border="0" alt="[cheers]" />