Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Motor Mount Install Question????

Thread Tools
 
Search this Thread
 
Old 01-05-2007 | 10:01 PM
  #1  
cabech984's Avatar
Thread Starter
12 Second Club
iTrader: (11)
 
Joined: Aug 2005
Posts: 836
Likes: 0
From: Ohio
Default Help!!! Motor Mount Install Question????

Im swapping my mounts out right now and was curious if I could put the 18mm bolts in opposite the way they came out? That way If I were to ever need them out again I wouldnt have to pull the alternator and AC Compressor. May be a dumb question but I figured Id ask before I mess something up.

Last edited by cabech984; 01-05-2007 at 10:23 PM.
Old 01-05-2007 | 10:22 PM
  #2  
cabech984's Avatar
Thread Starter
12 Second Club
iTrader: (11)
 
Joined: Aug 2005
Posts: 836
Likes: 0
From: Ohio
Default

I meant the 18 MM bolts, can they go in tranny side 1st instead of pulley side 1st?
Old 01-05-2007 | 11:03 PM
  #3  
cabech984's Avatar
Thread Starter
12 Second Club
iTrader: (11)
 
Joined: Aug 2005
Posts: 836
Likes: 0
From: Ohio
Default

need help now!!!! thanks in advance
Old 01-05-2007 | 11:05 PM
  #4  
Z28_DAD's Avatar
12 Second Club
iTrader: (18)
 
Joined: Mar 2005
Posts: 638
Likes: 0
From: Lake Zurich IL
Default

thats what i did and my motor hasnt fallen out yet.
Old 01-05-2007 | 11:09 PM
  #5  
cabech984's Avatar
Thread Starter
12 Second Club
iTrader: (11)
 
Joined: Aug 2005
Posts: 836
Likes: 0
From: Ohio
Default

Sweet, one reply is enough, thanks. Didnt know if there would be a any bolt clearance issue. Thanks again!!
Old 01-05-2007 | 11:12 PM
  #6  
brad8266's Avatar
TECH Senior Member
iTrader: (23)
 
Joined: Aug 2005
Posts: 8,797
Likes: 0
From: Watertown, NY
Default

yeah it doesnt matter.




All times are GMT -5. The time now is 04:10 PM.