Fernco Mod
#43
TECH Fanatic
iTrader: (5)
Join Date: Jan 2005
Location: Southwest Ranches, Florida
Posts: 1,112
Likes: 0
Received 0 Likes
on
0 Posts
the slp bellow has been doing good for me for almost 2 years and no issues. I had doubts if it would fit over my NW TB but it's holding up good.
And I dont remember the slp bellow costing that much when i got it.
And I dont remember the slp bellow costing that much when i got it.
#46
TECH Senior Member
iTrader: (42)
Join Date: Dec 2004
Location: Tomball/Nacogdoches TX
Posts: 5,063
Likes: 0
Received 0 Likes
on
0 Posts
www.bakerprecision.com
It'll get deleted soon by the power hungry mods so you better bookmark it before it's gone
It'll get deleted soon by the power hungry mods so you better bookmark it before it's gone
#48
Originally Posted by chaman
Hey I said in the damn post that a coupler/plumbing can only be so damn high quality!!!
It doesn't crack stuff and it looks purty.
Compared to a free accordian..
or
...a piece of crap that cracks you lid
it is a higher quality/better looking piece.
Freakin' picking words out and misquoting me.
Sheesh, it is like the Republicans and Democrats are starting to squeeze in here.
#49
TECH Enthusiast
Join Date: May 2006
Location: south jersey
Posts: 644
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Andros
the slp bellow has been doing good for me for almost 2 years and no issues. I had doubts if it would fit over my NW TB but it's holding up good.
my slp bellow didnt fit over my nw tb... but it might of if i got a running start and kicked it. 4 inch fenrco doesnt work for the nw either - its made to go over top 4 inch id pvc not 4 inche i/d itself.
got 4 inch id water hose(from sort of local deisel tractor trailor place-berco) for mine since i learned 3.5 fits inside my nw tb the hard way...
#52
Originally Posted by Genesis_26317
4th gen's
http://www.slponline.com/view_product.asp?P=23065
You can get the same exact SLP piece from another company for $45 (like me ).
http://www.slponline.com/view_product.asp?P=23065
You can get the same exact SLP piece from another company for $45 (like me ).
Originally Posted by Matt D
Yeah like relocating your trans cooler because it interferes with the SSRA
#53
TECH Senior Member
iTrader: (42)
Join Date: Dec 2004
Location: Tomball/Nacogdoches TX
Posts: 5,063
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by orangeapeel
Im power hungry. But your **** looks good, so I will let it slide.
#54
Launching!
iTrader: (4)
Join Date: Dec 2002
Location: southern ohio
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
I've had both the baker hose and the SLP bellow. The baker hose caused my slp lid to pop out on the back a lot. That was with poly motor mounts. Never had a single problem with the SLP bellow. I think it is worth the money. Everything on our cars is expensive. $50 for a quality piece isn't bad when you compare it to $2 worth of plastic that someone molded into a lid and charge $100+ for or a piece of sheet metal that someone bent up and is a "ram air". I'm not bashing either the lid or the ram air products, just trying to put the SLP bellow in perspective. It's not a piece of plumbing. It's a purpose made part that I would be willing to bet took about the same investment as the lid did to produce. Just because you can't run to Wally world and pick up a dust pan for $6 and use it as a lid doesnt mean you should do the same for your bellow...
Sorry for the rant... I'm going to get another beer!
Sorry for the rant... I'm going to get another beer!
#59
Originally Posted by 2002blackZ
I've had both the baker hose and the SLP bellow. The baker hose caused my slp lid to pop out on the back a lot. That was with poly motor mounts. Never had a single problem with the SLP bellow. I think it is worth the money. Everything on our cars is expensive. $50 for a quality piece isn't bad when you compare it to $2 worth of plastic that someone molded into a lid and charge $100+ for or a piece of sheet metal that someone bent up and is a "ram air". I'm not bashing either the lid or the ram air products, just trying to put the SLP bellow in perspective. It's not a piece of plumbing. It's a purpose made part that I would be willing to bet took about the same investment as the lid did to produce. Just because you can't run to Wally world and pick up a dust pan for $6 and use it as a lid doesnt mean you should do the same for your bellow...
Sorry for the rant... I'm going to get another beer!
Sorry for the rant... I'm going to get another beer!
Yah! I have some help not looking like a total ricer!
Though I wouldn't pay $60 for a bellows $45 was my limit and I liked it, the rising prices are ridiculous. I guess they are trying to soak as many people for cash as they can before they get to soak new people with the 5th gen.
Anyway, like I said ealier if you really want ridiculous look at the Corvette guys, it hit around $400 with shipping a little while back (C6 caused the C5 prices to drop) for a "bellows" that did just a little as the bellows on the 4th gen except that those weren't able to hold boost without exploding into engine shrapnel. Anyone who tells you that they made a gain is probably using a butt dyno (or they did the intake at the same time).