78 mm fast intake whistle?
Originally Posted by 00formLs1
then the problem should be fixed in a month. gettin some TD dumped before the axle
over... 
then there you go. Actually, that noise may have already been there, but you were just listening for more hp/tq, and instead you got the same whistle that was there before along with a sharper throttle response. 
I'd have to remove my intake also to snap some pics.
I'd do it, but its been so damn cold around here - I cant stay outside long enough to get everything off the car & remove the thing.
maybe by this weekend, if the weather breaks some.
I'd do it, but its been so damn cold around here - I cant stay outside long enough to get everything off the car & remove the thing.
maybe by this weekend, if the weather breaks some.
Sorry its taking so long.... Hang in there guys....
Got the shot in my digital today....will have it posted by the weekend.
No need to send me a pic or remove any intakes.
Check this thread by the weekend for the answer to your whistling woes....LOL
Later,
Tony
Got the shot in my digital today....will have it posted by the weekend.
No need to send me a pic or remove any intakes.
Check this thread by the weekend for the answer to your whistling woes....LOL
Later,
Tony
Here is the pic.... Ok Guys....
This is the area of the intake that is the problem.....it has an extremely sharp lip there that needs to be radiused to effectively remove the infamous 78 mm FAST whistle. Dont be shy with the grinder....the larger the radius the better.
No more annoying whistle when finished!
This is the area of the intake that is the problem.....it has an extremely sharp lip there that needs to be radiused to effectively remove the infamous 78 mm FAST whistle. Dont be shy with the grinder....the larger the radius the better.
No more annoying whistle when finished!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
well I pulled off the intake again, put on the radius and re-installed I did not put a big enough radius but it is a lot better I can live with it until heads and cam
Thanks for all the input everyone
Thanks for all the input everyone
Originally Posted by Tony Mamo @ AFR
Ok Guys....
This is the area of the intake that is the problem.....it has an extremely sharp lip there that needs to be radiused to effectively remove the infamous 78 mm FAST whistle. Dont be shy with the grinder....the larger the radius the better.
No more annoying whistle when finished!
This is the area of the intake that is the problem.....it has an extremely sharp lip there that needs to be radiused to effectively remove the infamous 78 mm FAST whistle. Dont be shy with the grinder....the larger the radius the better.
No more annoying whistle when finished!
Picture?
