ramair for the regular TA?
Thread Starter
Teching In
Joined: Jun 2006
Posts: 47
Likes: 0
ramair for the regular TA? okay guys, ram air on a regular TA.. i am looking into air lids at the moment (my first modd!) and was wondering how the ramair setup works? i know you have to buy that metal piece for the base of the setup, but how the hell does it really work, and where does it suck the air from? whats the best product to go with?
Thread Starter
Teching In
Joined: Jun 2006
Posts: 47
Likes: 0
another thing. my friend and i were looking at how my airlid and hood is setup stock. and his firehawks ramair setup. where the air would/could be suck in, there the block of metal where the latch is. now we were thinking if you cut out holes and match the airflow to the air lid opening, you could have the a ramair hood with the regular TA hood. has anyone done this, any write ups on it??
Originally Posted by Obelisk86
okay guys, ram air on a regular TA.. i am looking into air lids at the moment (my first modd!) and was wondering how the ramair setup works? i know you have to buy that metal piece for the base of the setup, but how the hell does it really work, and where does it suck the air from? whats the best product to go with?
Originally Posted by Obelisk86
okay guys, ram air on a regular TA.. i am looking into air lids at the moment (my first modd!) and was wondering how the ramair setup works? i know you have to buy that metal piece for the base of the setup, but how the hell does it really work, and where does it suck the air from? whats the best product to go with?
Here's a link.
http://www.lmperformance.com/1858/1.html
Joined: Nov 2003
Posts: 6,216
Likes: 236
From: Wichita KS / Rancho San Diego
Originally Posted by Obelisk86
another thing. my friend and i were looking at how my airlid and hood is setup stock. and his firehawks ramair setup. where the air would/could be suck in, there the block of metal where the latch is. now we were thinking if you cut out holes and match the airflow to the air lid opening, you could have the a ramair hood with the regular TA hood. has anyone done this, any write ups on it??
https://ls1tech.com/forums/generation-iii-external-engine/602430-cai-iat-s.html
Except for the RA hood, other systems draw the fresh air from down below the air dam with the risk of sucking up water.
Joined: Nov 2003
Posts: 6,216
Likes: 236
From: Wichita KS / Rancho San Diego
Oh, and here is the original write-up I did. I was kidding around a bit when I wrote. Later I changed to the Velcro set-up and cut out some sheet plastic for rain blockers and screens for when it's buggy outside. https://ls1tech.com/forums/generation-iii-external-engine/586504-wt-ram-air.html
