SES light

Reply Subscribe

Thread Tools

Search this Thread

Mar 8, 2007 | 07:14 PM

motomike734

Thread Starter

On The Tree

iTrader: (2)

Joined: Jan 2007

Posts: 187

Likes: 0

SES light

i plugged my car in tonihgt came up as misfire in mulitply cyenders, i think is what it says, i rember it not being one but sayin it was one but diffrent one each time or something? It was blinking,

Mar 8, 2007 | 07:54 PM

Red99TA

TECH Addict

iTrader: (11)

Joined: Oct 2003

Posts: 2,442

Likes: 6

From: Topeka, KS

are you stock? this is a common light after a cam swap.

Mar 8, 2007 | 07:56 PM

motomike734

Thread Starter

On The Tree

iTrader: (2)

Joined: Jan 2007

Posts: 187

Likes: 0

ya im stock i just add bbk intake tb lts ory and unplugged egr air and rear o2s without a tune. I hav the rear o2s in the front and i heard you cant switch

Mar 8, 2007 | 08:00 PM

Red99TA

TECH Addict

iTrader: (11)

Joined: Oct 2003

Posts: 2,442

Likes: 6

From: Topeka, KS

okay so you ditched the front O2's and you plugged the rears into where the fronts go? If so then that will cause a light too. You MUST have your front O2's plugged in and functional. If you just put the rear sensors in the spot of the fronts and plugged the clips for the fronts in then I would think it would work okay. Not sure if the rears are a different part than the fronts.

Mar 8, 2007 | 10:45 PM

TheBlurLS1

That's what she said...

iTrader: (8)

Joined: Mar 2004

Posts: 7,954

Likes: 2

From: Nederland Texas

Check fuses, check and make sure the plugs/wires are good and the coil pack harness is connected well. Cracked plugs are common, you may have more than one. You didn't install the LT's with the plugs in place did you?