rubenlee21

iTrader: (1)

i have a fernco and its been workin just fine

foreverzero

iTrader: (5)

i have the fernco, airflo, and the stocker.....(hey i go junkyard searching) next time Im at the track im gonna test them all

bigfatls6

iTrader: (34)

So what size would be requied to go between a whisper lid and stock mass air meter and then between the mass air meter and stock throttle body?

tillery

iTrader: (4)

SLP is a better piece all the way around than the fernco mod. I bought mine when it was about 45 bucks from SLP.

jimmypop13

iTrader: (17)

bringing this up from the dead. What are people doing who have a 85mm lid and a 90mm throttle body and don't want to run a maf? You'd have to have something that's 4" in diameter and around 6" long but that curves in the middle.

This is all I've found but I'm not sure it would actually be 6" long
http://intakehoses.com/Merchant2/mer...gory_Code=SAE0

EW1

iTrader: (10)

When I did my lid install, all I did was use two 4" to 3.5" couplers on both ends of the MAF.