New improved FTRA Photo and link inside.
Thread Starter
TECH Fanatic
Joined: Nov 2001
Posts: 1,705
Likes: 0
From: Iowa :-/~
New improved FTRA Photo and link inside. I took the Idea from Fast Toys Ram Air and expanded on it. I got some heater ducting and made my own. But I extended it down to just below the nose of the car. (The car is used mostly for drag race so it will not be driven in the rain.) I have some photos on the link above take a look I'll have a few more photos up tonight with the nose on and the scoop widened to catch more air. I silicone the box alt all the joints and made it air tight so I aught to get good gains from it. In one of the photos you see red silicone this is to seal the two piece where it goes around the supports. I also cut the foam AND the bumper to allow more air to come in from the front to make up for the air that I blocked off front the scoop. I then inserted ducting to make the air hit the radiator at a higher velocity.
More photos here.
<img src="http://communities.msn.com/_Secure/0MgD5HDQRCapxO5kRmPOfXI9TuLGy8XtDyYnMgoxcTy69nRmOi oXhuLX*ZVT0AviPpzRo93HlF4PMWAheLMDSOw/image13.jpg" alt="" />
<small>[ March 25, 2002, 12:14 PM: Message edited by: 2000 Camaro SS ]</small>
More photos here.
<img src="http://communities.msn.com/_Secure/0MgD5HDQRCapxO5kRmPOfXI9TuLGy8XtDyYnMgoxcTy69nRmOi oXhuLX*ZVT0AviPpzRo93HlF4PMWAheLMDSOw/image13.jpg" alt="" />
<small>[ March 25, 2002, 12:14 PM: Message edited by: 2000 Camaro SS ]</small>
