dynatech 1-7/8" and loudmouth
Thread Starter
Staging Lane
Joined: Dec 2001
Posts: 57
Likes: 0
From: Pearland, TX
dynatech 1-7/8" and loudmouth i have been told that i need a custom made y-pipe for this setup, where should i get it made and what price range should i be looking for. Also what do you think of this combo for street??
Re: dynatech 1-7/8" and loudmouth I run a 2 7/8's y pipe into a 3" intermediate pipe on my setup, with a cutout for the track.
I have a seen a 2 7/8's to 3.5 before. Looked HUGE. Probably good on a H/C car or forced induction.
I have a seen a 2 7/8's to 3.5 before. Looked HUGE. Probably good on a H/C car or forced induction.
Re: dynatech 1-7/8" and loudmouth i have a custom off road pipe (2.5" non-mandrel bent) to keep a llittle bit of backpressure, but i have dynomax bullet mufler in teh stock intermediate pipe. it flows VERY WELL and is damn loud at WOT! race car loud! LOL -i dont drive it many miles a week! it is a fun exhaust.
