Pacesetter LT Headers
Originally Posted by litle8
I'll check my garage come to think of it..I might have some spares, If I find them Ill give it to you no problem, just pm me your address....be back in a few
Should I get OEM header gaskets? How about stage 8 bolts? I'm also gonna go with a ORY because its a lot cheaper.
Originally Posted by SSmokin99
Oh thanks man! If you find an extra freeze plug let me know and I'll PM you my address...I just called speed inc. and they said I'll need 2- block off plates for the AIR and 1- block off plate for EGR...Then I need 1- Freeze plug...Is this right? I'll also need 2- 24" extension, but hold off on the O2 sims right?
Should I get OEM header gaskets? How about stage 8 bolts? I'm also gonna go with a ORY because its a lot cheaper.
Should I get OEM header gaskets? How about stage 8 bolts? I'm also gonna go with a ORY because its a lot cheaper.
Originally Posted by 0utlawTorn
Buy the OEM GM steel gaskets. As for the bolts, I just used the ones that came with the headers....no problems or leaks. But yeah you'll need the block off plates unless you get the race style headers, freeze plug, extensions, and O2 sims unless you get the rear O2's tuned out.
1- block off plate for the EGR
2- block off plates for the AIR
1- Freeze plug for my LS6 intake(EGR)
2- 24" extensions
I plan on tuning it a few months after I do the install...So should I also get O2 sims? I've also read of O2 "Bungs"...what is that?...
Originally Posted by SSmokin99
Oh thanks man! If you find an extra freeze plug let me know and I'll PM you my address...I just called speed inc. and they said I'll need 2- block off plates for the AIR and 1- block off plate for EGR...Then I need 1- Freeze plug...Is this right? I'll also need 2- 24" extension, but hold off on the O2 sims right?
Should I get OEM header gaskets? How about stage 8 bolts? I'm also gonna go with a ORY because its a lot cheaper.
Should I get OEM header gaskets? How about stage 8 bolts? I'm also gonna go with a ORY because its a lot cheaper.
As far as the freeze plug, the plug is for what,the lid? that you can get at a parts store or harware store, try a search and you'll find it.
The ws6 store I think has the cheapest prices for the o2ext's they are a sponsor.
Yea I would hold off I have, i am just gonna get them deleted when I get a dyno tune!
I reused my header gaskets, but then again I only have 31k mi. but I would of used the oem metal ones,and do not use the ones that come with the headers they are garbage!
I heard the stage 8 are a pain!! you can reuse the stock, but I just went to the dealer and bought new ones!
As far as the ypipe its all up to you sir,tsp has a catted Y since you live in Cali.
Let me know what you want me to do!! I gotta go to speedinc on monday and get my lower control arms!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by SSmokin99
Oh thanks man! If you find an extra freeze plug let me know and I'll PM you my address...I just called speed inc. and they said I'll need 2- block off plates for the AIR and 1- block off plate for EGR...Then I need 1- Freeze plug...Is this right? I'll also need 2- 24" extension, but hold off on the O2 sims right?
Should I get OEM header gaskets? How about stage 8 bolts? I'm also gonna go with a ORY because its a lot cheaper.
Should I get OEM header gaskets? How about stage 8 bolts? I'm also gonna go with a ORY because its a lot cheaper.
As far as the freeze plug, the plug is for what,the lid? that you can get at a parts store or harware store, try a search and you'll find it.
The ws6 store I think has the cheapest prices for the o2ext's they are a sponsor.
Yea I would hold off I have, i am just gonna get them deleted when I get a dyno tune!
I reused my header gaskets, but then again I only have 31k mi. but I would of used the oem metal ones,and do not use the ones that come with the headers they are garbage!
I heard the stage 8 are a pain!! you can reuse the stock, but I just went to the dealer and bought new ones!
As far as the ypipe its all up to you sir,tsp has a catted Y since you live in Cali.
Let me know what you want me to do!! I gotta go to speedinc on monday and get my lower control arms!
Originally Posted by SSmokin99
Yes, I purchased racestyle LT's. I keep hearing different things about the block off plates. I talked to Speen Inc. and I told them I have a 99 LS1. I bought Pacesetter LT's (racestyle)...They said I would need:
1- block off plate for the EGR
2- block off plates for the AIR
1- Freeze plug for my LS6 intake(EGR)
2- 24" extensions
I plan on tuning it a few months after I do the install...So should I also get O2 sims? I've also read of O2 "Bungs"...what is that?...
1- block off plate for the EGR
2- block off plates for the AIR
1- Freeze plug for my LS6 intake(EGR)
2- 24" extensions
I plan on tuning it a few months after I do the install...So should I also get O2 sims? I've also read of O2 "Bungs"...what is that?...
Last edited by 0utlawTorn; Apr 28, 2007 at 08:32 PM.