Shhhhhhh Whisper lid question
Thread Starter
On The Tree
Joined: Apr 2002
Posts: 118
Likes: 0
From: Fairfax VA
Shhhhhhh Whisper lid question Ok I got a whisper lid from some one and its blank it doesnt say LS1 or anything like the other I have seen are there some out there like that or did I get ripped off. Also it doesn fit quite right I installed it just fine then when it came down to snaping the clamps the would stay shut so I had to tuck the front of the lid on the inside of the lower air box lip is this how it is supposed to be??? Can some one please please take a picture of there whisper lid up close the front and scan it in so I can see if mine is done right.
Re: Shhhhhhh Whisper lid question Joshua,
Try this page..
Install University Whisper Lid install
Alot of people have trouble with them the first time... remember that the front lip goes inside the little groove in front lower air box.
I can send you a sticker.. email me.
<small>[ April 29, 2002, 11:43 AM: Message edited by: WILWAXU ]</small>
Try this page..
Install University Whisper Lid install
Alot of people have trouble with them the first time... remember that the front lip goes inside the little groove in front lower air box.
I can send you a sticker.. email me.
<small>[ April 29, 2002, 11:43 AM: Message edited by: WILWAXU ]</small>
Re: Shhhhhhh Whisper lid question You think the Whisper Lid was a Pita to install, try MTI's POS lid. After lying about it being in stock three weeks later I was told it was on back order. The collar doesnt seal worth a crap and the fit is worse and it is really flimsy. The Whisper CF lid that I replaced it with is great, even though you have to tuck the front just like the other ones.
TECH Apprentice
Joined: Nov 2001
Posts: 336
Likes: 0
From: Aub, Fl
Re: Shhhhhhh Whisper lid question Here's a pic of my carbon fibre Whisper lid, some times the LS1 emblem tends to peel of of the Whisper lids or even many people take them off and do custom stickers or just leave them black. As John Brown mentioned he can get you a sticker, he got me one once for my old lid on my T/A. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> Anyway, here's the pic(I added the SS sticker)> http://community.webshots.com/photo/...33806208pPqXqc
<small>[ May 13, 2002, 08:05 PM: Message edited by: LS1JAY ]</small>
<small>[ May 13, 2002, 08:05 PM: Message edited by: LS1JAY ]</small>
Trending Topics
Re: Shhhhhhh Whisper lid question The only lid that I've had luck with is the MTI lid. I broke two Whisper lids from being flimsy and not fitting right, and the Direct Flo didn't fit all that great. I've had two different MTI lids, and both of them have fit excellent.
The LS1 decal that comes on the Whisper lid can be peeled off, so it's probably what the guy said, just without the decal.
The LS1 decal that comes on the Whisper lid can be peeled off, so it's probably what the guy said, just without the decal.
__________________
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
